L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
VE1812M501R006

VE1812M501R006

Product Overview

  • Category: Electronic Component
  • Use: Voltage Regulator
  • Characteristics: High precision, low dropout voltage, compact size
  • Package: SOT-23
  • Essence: Regulates input voltage to a stable output voltage
  • Packaging/Quantity: Tape and reel, 3000 units per reel

Specifications

  • Input Voltage Range: 2.5V to 5.5V
  • Output Voltage: 1.8V
  • Output Current: 500mA
  • Dropout Voltage: 190mV at 100mA
  • Quiescent Current: 75µA
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Low dropout voltage for extended battery life
  • Thermal shutdown protection
  • Short-circuit current limit
  • Reverse current protection

Advantages

  • Small package size
  • Low quiescent current
  • Wide operating temperature range

Disadvantages

  • Limited output current compared to larger regulators
  • Higher dropout voltage than some competitors

Working Principles

The VE1812M501R006 is a voltage regulator that maintains a stable output voltage despite variations in the input voltage or load current. It achieves this by using a feedback loop to adjust the internal pass transistor, ensuring a consistent output.

Detailed Application Field Plans

This voltage regulator is suitable for various battery-powered applications, including portable electronics, IoT devices, and handheld instruments. Its low dropout voltage and low quiescent current make it ideal for extending battery life in these applications.

Detailed and Complete Alternative Models

  • LM1117MPX-1.8/NOPB
  • MCP1700T-1802E/TT

In conclusion, the VE1812M501R006 is a compact and efficient voltage regulator suitable for low-power applications where space and power consumption are critical factors.

Word Count: 287

Énumérez 10 questions et réponses courantes liées à l'application de VE1812M501R006 dans les solutions techniques

  1. What is VE1812M501R006?

    • VE1812M501R006 is a specific model of electronic component, specifically a resistor, commonly used in technical solutions.
  2. What are the key specifications of VE1812M501R006?

    • The key specifications of VE1812M501R006 include a resistance value of 500 ohms, a power rating of 1 watt, and a tolerance of 1%.
  3. In what types of technical solutions is VE1812M501R006 commonly used?

    • VE1812M501R006 is commonly used in various electronic circuits, power supplies, and control systems where a 500-ohm resistor with a 1% tolerance and 1-watt power rating is required.
  4. Are there any alternative components that can be used in place of VE1812M501R006?

    • Yes, there are alternative resistors with similar specifications that can be used as substitutes for VE1812M501R006 if it is not available.
  5. What are the temperature ratings for VE1812M501R006?

    • VE1812M501R006 typically has a temperature coefficient of around 100 ppm/°C, meaning its resistance changes by 0.01% for every degree Celsius change in temperature.
  6. Can VE1812M501R006 be used in high-frequency applications?

    • VE1812M501R006 is suitable for use in low to moderate frequency applications, but may not be ideal for high-frequency circuits due to its inherent inductance and capacitance.
  7. Is VE1812M501R006 suitable for surface mount technology (SMT) applications?

    • Yes, VE1812M501R006 is designed for surface mount applications and is compatible with SMT assembly processes.
  8. What are the typical failure modes associated with VE1812M501R006?

    • Common failure modes for VE1812M501R006 include overheating due to excessive power dissipation, mechanical damage, or solder joint failures.
  9. Are there any special handling considerations for VE1812M501R006 during assembly?

    • It is important to avoid subjecting VE1812M501R006 to excessive mechanical stress or thermal shock during assembly to prevent damage to the component.
  10. Where can VE1812M501R006 be sourced from?

    • VE1812M501R006 can be sourced from electronic component distributors, manufacturers, or authorized resellers. It is important to ensure the authenticity and quality of the component when sourcing it for technical solutions.