IS25WP256D-JMLE-TR belongs to the category of non-volatile memory devices.
This product is primarily used for storing and retrieving digital information in electronic systems.
The IS25WP256D-JMLE-TR is available in a small form factor package, which facilitates its integration into various electronic systems.
The essence of this product lies in its ability to provide reliable and high-capacity non-volatile memory storage for electronic devices.
The IS25WP256D-JMLE-TR is typically packaged in reels or trays, with each reel or tray containing a specific quantity of devices. The exact packaging and quantity may vary depending on the manufacturer's specifications.
The IS25WP256D-JMLE-TR features a standard pin configuration for SPI flash memory devices. The following table provides a detailed pin description:
| Pin Name | Function | |----------|----------| | VCC | Power supply voltage | | GND | Ground | | CS# | Chip select | | SCK | Serial clock | | SI | Serial input | | SO | Serial output | | WP# | Write protect | | HOLD# | Hold input |
The IS25WP256D-JMLE-TR utilizes the Serial Peripheral Interface (SPI) protocol to communicate with the host system. It stores data in a series of memory cells, which can be electrically programmed and erased. When data is read from the memory, the device retrieves the stored information and transfers it to the host system via the SPI interface.
The IS25WP256D-JMLE-TR finds applications in various electronic systems, including but not limited to: - Consumer electronics: Smartphones, tablets, digital cameras - Automotive: Infotainment systems, instrument clusters - Industrial: Internet of Things (IoT) devices, industrial automation - Medical: Patient monitoring systems, medical imaging equipment
These alternative models offer similar functionality and specifications to the IS25WP256D-JMLE-TR and can be considered as alternatives based on specific application requirements.
Word count: 554 words
Sure! Here are 10 common questions and answers related to the application of IS25WP256D-JMLE-TR in technical solutions:
Q: What is IS25WP256D-JMLE-TR? A: IS25WP256D-JMLE-TR is a specific model of Serial NOR Flash memory chip manufactured by ISSI.
Q: What is the capacity of IS25WP256D-JMLE-TR? A: The IS25WP256D-JMLE-TR has a capacity of 256 megabits (32 megabytes).
Q: What is the interface used by IS25WP256D-JMLE-TR? A: IS25WP256D-JMLE-TR uses the Serial Peripheral Interface (SPI) for communication with the host microcontroller.
Q: What voltage levels does IS25WP256D-JMLE-TR support? A: IS25WP256D-JMLE-TR supports both 1.8V and 3.3V voltage levels.
Q: What is the maximum operating frequency of IS25WP256D-JMLE-TR? A: The maximum operating frequency of IS25WP256D-JMLE-TR is typically 104 MHz.
Q: Can IS25WP256D-JMLE-TR be used for code storage in embedded systems? A: Yes, IS25WP256D-JMLE-TR is commonly used for storing program code in various embedded systems.
Q: Is IS25WP256D-JMLE-TR suitable for data logging applications? A: Yes, IS25WP256D-JMLE-TR can be used for data logging due to its non-volatile nature and high endurance.
Q: Does IS25WP256D-JMLE-TR support over-the-air (OTA) firmware updates? A: Yes, IS25WP256D-JMLE-TR can be used for OTA firmware updates in devices that support such functionality.
Q: Can IS25WP256D-JMLE-TR operate in extreme temperature conditions? A: Yes, IS25WP256D-JMLE-TR has a wide operating temperature range of -40°C to +85°C.
Q: Are there any specific software tools required for programming IS25WP256D-JMLE-TR? A: Yes, various software development tools and libraries are available for programming and interfacing with IS25WP256D-JMLE-TR.
Please note that the answers provided here are general and may vary depending on the specific requirements and implementation of the technical solution.