Category: Integrated Circuit (IC)
Use: ISL8485EIBZ-T is a transceiver IC used for serial communication in industrial applications.
Characteristics: - High-speed data transmission - Robust performance in noisy environments - Low power consumption - Wide operating voltage range
Package: The ISL8485EIBZ-T comes in a small outline integrated circuit (SOIC) package.
Essence: The ISL8485EIBZ-T is an essential component for reliable and efficient serial communication in industrial settings.
Packaging/Quantity: The IC is typically packaged in reels, with each reel containing a specific quantity of ICs.
The ISL8485EIBZ-T has the following pin configuration:
| Pin Number | Pin Name | Description | |------------|----------|-------------| | 1 | VCC | Power supply voltage input | | 2 | GND | Ground reference | | 3 | RO | Receiver Output | | 4 | RE | Receiver Enable | | 5 | DE | Driver Enable | | 6 | DI | Driver Input | | 7 | NC | No Connection | | 8 | VCC | Power supply voltage input |
Advantages: - High-speed data transmission capability - Robust performance in noisy industrial environments - Wide operating voltage range allows compatibility with various systems - Low power consumption for energy efficiency
Disadvantages: - Limited to single-channel communication - Requires external components for complete system integration
The ISL8485EIBZ-T is designed to facilitate serial communication using the RS-485/RS-422 standard. It operates in a half-duplex mode, allowing bidirectional data transmission on a single pair of wires. The driver section converts the logic-level signals into differential voltages, while the receiver section converts the received differential voltages back into logic-level signals.
The IC incorporates features such as fail-safe receivers, which ensure reliable data reception even in the presence of noise or signal distortion. Additionally, thermal shutdown protection safeguards the IC from overheating, enhancing its durability.
The ISL8485EIBZ-T finds extensive use in various industrial applications, including but not limited to:
These alternative models can be considered based on specific application requirements and availability in the market.
Word count: 520 words
Sure! Here are 10 common questions and answers related to the application of ISL8485EIBZ-T in technical solutions:
Q: What is ISL8485EIBZ-T? A: ISL8485EIBZ-T is a high-speed, differential bus transceiver commonly used in industrial applications.
Q: What is the operating voltage range of ISL8485EIBZ-T? A: The operating voltage range of ISL8485EIBZ-T is typically between 3V and 5.5V.
Q: What is the maximum data rate supported by ISL8485EIBZ-T? A: ISL8485EIBZ-T supports a maximum data rate of 52 Mbps.
Q: Can ISL8485EIBZ-T be used for half-duplex communication? A: Yes, ISL8485EIBZ-T can be used for both half-duplex and full-duplex communication.
Q: What is the typical operating temperature range of ISL8485EIBZ-T? A: The typical operating temperature range of ISL8485EIBZ-T is -40°C to +85°C.
Q: Does ISL8485EIBZ-T support fail-safe biasing? A: Yes, ISL8485EIBZ-T supports fail-safe biasing, ensuring a known output state when inputs are open or shorted.
Q: Can ISL8485EIBZ-T be used in RS-485 networks? A: Yes, ISL8485EIBZ-T is specifically designed for use in RS-485 networks.
Q: What is the maximum number of nodes that can be connected in an RS-485 network using ISL8485EIBZ-T? A: The maximum number of nodes that can be connected in an RS-485 network using ISL8485EIBZ-T is 32.
Q: Does ISL8485EIBZ-T have built-in protection features? A: Yes, ISL8485EIBZ-T has built-in protection features such as thermal shutdown and short-circuit protection.
Q: What package does ISL8485EIBZ-T come in? A: ISL8485EIBZ-T comes in an 8-lead SOIC package.
Please note that the answers provided here are general and may vary depending on the specific application and requirements. It's always recommended to refer to the datasheet and consult with the manufacturer for detailed information.