Intersil
L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
ISL6613BIR
Voir les détails DataSheets

ISL6613BIR

Product Overview

Category

ISL6613BIR belongs to the category of integrated circuits (ICs).

Use

The ISL6613BIR is commonly used as a synchronous buck MOSFET driver.

Characteristics

  • High efficiency
  • Low power consumption
  • Fast switching speed
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

ISL6613BIR is available in a small outline integrated circuit (SOIC) package.

Essence

The essence of ISL6613BIR lies in its ability to efficiently drive MOSFETs in synchronous buck converter applications.

Packaging/Quantity

ISL6613BIR is typically packaged in reels and each reel contains 2500 units.

Specifications

  • Input Voltage Range: 4.5V to 14V
  • Output Voltage Range: 0.8V to VIN
  • Maximum Output Current: 6A
  • Operating Temperature Range: -40°C to +85°C
  • Switching Frequency: Up to 2MHz
  • Supply Current: 1.5mA

Detailed Pin Configuration

The ISL6613BIR has the following pin configuration:

  1. VCC
  2. GND
  3. BOOT
  4. PHASE
  5. COMP
  6. FB
  7. SS
  8. SYNC

Functional Features

  • Integrated bootstrap diode
  • Adaptive shoot-through protection
  • Adjustable soft-start
  • Error amplifier with precision reference
  • Synchronization capability
  • Fault flag output

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power dissipation
  • Fast switching speed improves overall system performance
  • Wide input voltage range allows for versatile applications
  • Overcurrent and thermal shutdown protection enhance reliability

Disadvantages

  • Limited maximum output current of 6A may not be suitable for high-power applications
  • Operating temperature range of -40°C to +85°C may restrict usage in extreme environments

Working Principles

The ISL6613BIR operates by receiving control signals from a controller and driving the MOSFETs in a synchronous buck converter. It ensures efficient power conversion by controlling the switching of the MOSFETs based on the input voltage and load conditions.

Detailed Application Field Plans

ISL6613BIR is commonly used in various applications, including: - DC-DC converters - Voltage regulator modules (VRMs) - Power supplies - Battery charging circuits

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to ISL6613BIR are: - IR2104 - LTC4440 - MAX5070

These models offer similar functionalities and can be used as substitutes depending on specific requirements.

In conclusion, the ISL6613BIR is an integrated circuit used as a synchronous buck MOSFET driver. Its high efficiency, fast switching speed, and wide input voltage range make it suitable for various applications. However, its limited maximum output current and operating temperature range should be taken into consideration. The detailed pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models provide a comprehensive understanding of the ISL6613BIR.

Énumérez 10 questions et réponses courantes liées à l'application de ISL6613BIR dans les solutions techniques

Sure! Here are 10 common questions and answers related to the application of ISL6613BIR in technical solutions:

  1. Q: What is ISL6613BIR? A: ISL6613BIR is a high-performance dual MOSFET driver designed for driving two N-channel power MOSFETs in a synchronous buck or half-bridge configuration.

  2. Q: What are the key features of ISL6613BIR? A: The key features of ISL6613BIR include low propagation delay, high peak output current, wide input voltage range, integrated bootstrap diode, and thermal shutdown protection.

  3. Q: What is the typical application of ISL6613BIR? A: ISL6613BIR is commonly used in applications such as DC-DC converters, motor drives, power supplies, and other systems requiring high-speed switching.

  4. Q: What is the maximum operating voltage of ISL6613BIR? A: The maximum operating voltage of ISL6613BIR is typically around 20V.

  5. Q: How much peak output current can ISL6613BIR provide? A: ISL6613BIR can provide a peak output current of up to 4A.

  6. Q: Does ISL6613BIR have built-in protection features? A: Yes, ISL6613BIR has built-in thermal shutdown protection to prevent overheating and damage to the device.

  7. Q: Can ISL6613BIR be used with both N-channel and P-channel MOSFETs? A: No, ISL6613BIR is specifically designed for driving N-channel power MOSFETs only.

  8. Q: What is the recommended operating temperature range for ISL6613BIR? A: The recommended operating temperature range for ISL6613BIR is typically between -40°C to +125°C.

  9. Q: Does ISL6613BIR require an external bootstrap diode? A: No, ISL6613BIR has an integrated bootstrap diode, eliminating the need for an external diode.

  10. Q: Is ISL6613BIR RoHS compliant? A: Yes, ISL6613BIR is RoHS (Restriction of Hazardous Substances) compliant, ensuring it meets environmental regulations.

Please note that these answers are general and may vary depending on the specific datasheet and application requirements.