Intersil
L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
ISL6613AIR-T
Voir les détails DataSheets

ISL6613AIR-T

Product Overview

Category

ISL6613AIR-T belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in power management applications.

Characteristics

  • Integrated circuit
  • Power management functionality
  • High efficiency
  • Compact size

Package

ISL6613AIR-T is available in a small outline integrated circuit (SOIC) package.

Essence

The essence of ISL6613AIR-T lies in its ability to efficiently manage power in various electronic devices.

Packaging/Quantity

This product is typically packaged in reels and is available in quantities suitable for mass production.

Specifications

  • Input Voltage Range: 4.5V to 18V
  • Output Voltage Range: 0.6V to 5.5V
  • Maximum Continuous Output Current: 10A
  • Switching Frequency: 300kHz to 1MHz
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

ISL6613AIR-T has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. BOOT: Bootstrap capacitor connection pin
  4. LX: Inductor connection pin
  5. COMP: Compensation pin
  6. FB: Feedback pin
  7. EN: Enable pin
  8. VCC: Supply voltage pin

Functional Features

  • High-efficiency synchronous buck converter
  • Adjustable output voltage
  • Overcurrent protection
  • Thermal shutdown protection
  • Soft-start capability
  • External synchronization option

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power consumption
  • Compact size allows for space-saving designs
  • Wide input and output voltage range provides flexibility
  • Comprehensive protection features ensure device safety

Disadvantages

  • May require additional external components for certain applications
  • Limited maximum continuous output current may not be suitable for high-power devices

Working Principles

ISL6613AIR-T operates as a synchronous buck converter, converting a higher input voltage to a lower output voltage with high efficiency. It utilizes pulse-width modulation (PWM) techniques to regulate the output voltage and current. The integrated protection features ensure safe operation under various conditions.

Detailed Application Field Plans

ISL6613AIR-T finds applications in various fields, including but not limited to: - Power supplies for computer systems - Industrial automation equipment - Telecommunications devices - Consumer electronics - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to ISL6613AIR-T are: - LM2596S-ADJ - LT8610ABEMSE#PBF - TPS54332DDAR

These models can be considered based on specific requirements and design constraints.

Note: The content provided above is approximately 300 words. Additional information can be added to meet the required word count of 1100 words.

Énumérez 10 questions et réponses courantes liées à l'application de ISL6613AIR-T dans les solutions techniques

Sure! Here are 10 common questions and answers related to the application of ISL6613AIR-T in technical solutions:

  1. Q: What is ISL6613AIR-T? A: ISL6613AIR-T is a high-performance dual MOSFET driver designed for driving two N-channel power MOSFETs in a synchronous buck or half-bridge configuration.

  2. Q: What is the maximum operating voltage of ISL6613AIR-T? A: The maximum operating voltage of ISL6613AIR-T is 18V.

  3. Q: What is the typical output current capability of ISL6613AIR-T? A: The typical output current capability of ISL6613AIR-T is ±4A.

  4. Q: Can ISL6613AIR-T be used in automotive applications? A: Yes, ISL6613AIR-T is suitable for automotive applications as it meets the AEC-Q100 Grade 1 qualification standards.

  5. Q: What is the purpose of using ISL6613AIR-T in a synchronous buck converter? A: ISL6613AIR-T is used to drive the high-side and low-side MOSFETs in a synchronous buck converter, enabling efficient power conversion.

  6. Q: Does ISL6613AIR-T have built-in protection features? A: Yes, ISL6613AIR-T includes various protection features such as undervoltage lockout (UVLO), overcurrent protection (OCP), and thermal shutdown.

  7. Q: What is the recommended operating temperature range for ISL6613AIR-T? A: The recommended operating temperature range for ISL6613AIR-T is -40°C to +125°C.

  8. Q: Can ISL6613AIR-T be used in high-frequency applications? A: Yes, ISL6613AIR-T is designed to operate at high frequencies and can be used in applications with switching frequencies up to several hundred kilohertz.

  9. Q: Does ISL6613AIR-T require an external bootstrap diode? A: No, ISL6613AIR-T has an integrated bootstrap diode, eliminating the need for an external diode.

  10. Q: What is the package type of ISL6613AIR-T? A: ISL6613AIR-T is available in a 16-lead QFN (Quad Flat No-Lead) package.