Intersil
L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
ISL28130CHZ-T7
Voir les détails DataSheets

ISL28130CHZ-T7

Product Overview

Category

ISL28130CHZ-T7 belongs to the category of integrated operational amplifiers (op-amps).

Use

This product is commonly used in various electronic circuits and systems where amplification of signals is required.

Characteristics

  • High gain: The ISL28130CHZ-T7 offers a high voltage gain, making it suitable for applications requiring signal amplification.
  • Low noise: This op-amp has low input-referred noise, ensuring accurate signal processing.
  • Wide bandwidth: With a wide bandwidth, this product can handle high-frequency signals effectively.
  • Low power consumption: The ISL28130CHZ-T7 is designed to consume minimal power, making it suitable for battery-powered devices.

Package

The ISL28130CHZ-T7 comes in a compact surface-mount package, allowing for easy integration into circuit boards.

Essence

This op-amp provides reliable and precise amplification of signals, enhancing the performance of electronic systems.

Packaging/Quantity

The ISL28130CHZ-T7 is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Supply voltage range: ±2.5V to ±18V
  • Input offset voltage: 1mV (maximum)
  • Input bias current: 10nA (maximum)
  • Gain bandwidth product: 3MHz
  • Slew rate: 1.6V/µs
  • Operating temperature range: -40°C to +125°C

Detailed Pin Configuration

The ISL28130CHZ-T7 has a standard 8-pin dual in-line package (DIP) configuration:

```

| | --| V+ OUT |-- --| V- IN- |-- --| NC IN+ |-- --| NC VREF |-- --| NC GND |-- --| NC NC |-- --|__________| ```

Functional Features

  • Rail-to-rail input and output: The ISL28130CHZ-T7 supports input and output signals that can swing close to the supply rails.
  • Unity-gain stable: This op-amp remains stable even at unity gain, allowing for various circuit configurations.
  • Low distortion: With low total harmonic distortion (THD), this product ensures accurate signal reproduction.

Advantages and Disadvantages

Advantages

  • High gain and wide bandwidth enable precise signal amplification.
  • Low noise enhances signal fidelity.
  • Low power consumption makes it suitable for battery-powered devices.
  • Rail-to-rail input and output capability provides flexibility in circuit design.

Disadvantages

  • Limited supply voltage range compared to some other op-amps.
  • Relatively low slew rate may limit its performance in high-speed applications.

Working Principles

The ISL28130CHZ-T7 operates based on the principles of differential amplification. It amplifies the voltage difference between its two input terminals, providing an amplified output signal.

Detailed Application Field Plans

The ISL28130CHZ-T7 finds applications in various fields, including: 1. Audio amplification: It can be used in audio systems to amplify weak audio signals. 2. Sensor signal conditioning: This op-amp is suitable for amplifying and conditioning signals from sensors such as temperature sensors, pressure sensors, etc. 3. Instrumentation: It can be utilized in precision measurement instruments where accurate signal amplification is crucial. 4. Active filters: The ISL28130CHZ-T7 can be employed in active filter circuits for frequency response shaping.

Detailed and Complete Alternative Models

  1. LM358: A widely used general-purpose operational amplifier with similar characteristics.
  2. AD822: A precision op-amp with low noise and high gain.
  3. MCP6001: Low-power op-amp with rail-to-rail input/output capability.

These alternative models offer similar functionalities to the ISL28130CHZ-T7 and can be considered based on specific application requirements.

Word count: 530 words

Énumérez 10 questions et réponses courantes liées à l'application de ISL28130CHZ-T7 dans les solutions techniques

Sure! Here are 10 common questions and answers related to the application of ISL28130CHZ-T7 in technical solutions:

  1. Q: What is ISL28130CHZ-T7? A: ISL28130CHZ-T7 is a precision operational amplifier (op-amp) designed for use in various technical applications.

  2. Q: What are the key features of ISL28130CHZ-T7? A: Some key features include low offset voltage, low input bias current, high open-loop gain, wide supply voltage range, and rail-to-rail inputs and outputs.

  3. Q: What is the typical supply voltage range for ISL28130CHZ-T7? A: The typical supply voltage range is from 2.7V to 36V.

  4. Q: Can ISL28130CHZ-T7 operate with a single supply voltage? A: Yes, it can operate with a single supply voltage as low as 2.7V.

  5. Q: What is the maximum output current of ISL28130CHZ-T7? A: The maximum output current is typically around 40mA.

  6. Q: Is ISL28130CHZ-T7 suitable for low-power applications? A: Yes, it is designed for low-power applications and has a low quiescent current consumption.

  7. Q: Can ISL28130CHZ-T7 be used in high-precision measurement systems? A: Yes, it is suitable for high-precision measurement systems due to its low offset voltage and low input bias current.

  8. Q: Does ISL28130CHZ-T7 have built-in protection features? A: Yes, it has built-in protection against overvoltage, undervoltage, and short-circuit conditions.

  9. Q: What is the operating temperature range of ISL28130CHZ-T7? A: The operating temperature range is typically from -40°C to +125°C.

  10. Q: What are some common applications for ISL28130CHZ-T7? A: Some common applications include sensor interfaces, signal conditioning, data acquisition systems, medical instrumentation, and industrial control systems.

Please note that these answers are general and may vary depending on specific requirements and use cases.