Intersil
L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
HIP4080AIBT
Voir les détails DataSheets

HIP4080AIBT

Product Overview

Category

The HIP4080AIBT belongs to the category of integrated circuits (ICs) specifically designed for motor control applications.

Use

This IC is commonly used in various motor control systems, including brushless DC motors, stepper motors, and other similar applications.

Characteristics

  • High voltage capability: The HIP4080AIBT can handle high voltages up to 80V, making it suitable for a wide range of motor control applications.
  • Integrated driver circuitry: This IC integrates all the necessary driver circuitry required for motor control, reducing the need for additional external components.
  • Fast switching speed: With a high-speed gate driver, the HIP4080AIBT enables efficient and precise control of motor operation.
  • Protection features: The IC incorporates various protection features such as overcurrent protection, undervoltage lockout, and thermal shutdown, ensuring safe and reliable motor control.

Package

The HIP4080AIBT is available in a compact and industry-standard 20-pin TSSOP (Thin Shrink Small Outline Package) package.

Essence

The essence of the HIP4080AIBT lies in its ability to provide a comprehensive solution for motor control applications by integrating multiple driver circuits into a single IC.

Packaging/Quantity

The HIP4080AIBT is typically sold in reels containing a quantity of 250 units per reel.

Specifications

  • Supply Voltage Range: 10V to 80V
  • Output Current: Up to 2.5A
  • Operating Temperature Range: -40°C to +125°C
  • Logic Input Voltage: 3.3V to 5V
  • Maximum PWM Frequency: 1MHz

Detailed Pin Configuration

The HIP4080AIBT features a total of 20 pins, each serving a specific function. The pin configuration is as follows:

  1. VDD - Power supply voltage
  2. VDD - Power supply voltage
  3. VDD - Power supply voltage
  4. GND - Ground reference
  5. GND - Ground reference
  6. GND - Ground reference
  7. IN1 - Input 1 for motor control
  8. IN2 - Input 2 for motor control
  9. IN3 - Input 3 for motor control
  10. IN4 - Input 4 for motor control
  11. HIN1 - High-side gate driver input 1
  12. LIN1 - Low-side gate driver input 1
  13. HIN2 - High-side gate driver input 2
  14. LIN2 - Low-side gate driver input 2
  15. HIN3 - High-side gate driver input 3
  16. LIN3 - Low-side gate driver input 3
  17. HIN4 - High-side gate driver input 4
  18. LIN4 - Low-side gate driver input 4
  19. HO - High-side gate driver output
  20. LO - Low-side gate driver output

Functional Features

The HIP4080AIBT offers the following functional features:

  • Four independent half-bridge outputs for motor control
  • Integrated bootstrap diodes for high-side gate drivers
  • Adjustable dead-time control for efficient switching
  • Fault protection and diagnostics for enhanced reliability
  • Enable input for easy system control

Advantages and Disadvantages

Advantages

  • Integration of multiple driver circuits reduces external component count and simplifies design.
  • High voltage capability allows for versatile motor control applications.
  • Fast switching speed enables precise control and efficient motor operation.
  • Comprehensive protection features ensure safe and reliable operation.

Disadvantages

  • Limited to a maximum PWM frequency of 1MHz, which may not be suitable for certain high-frequency applications.
  • The 20-pin TSSOP package may require careful PCB layout considerations for optimal performance.

Working Principles

The HIP4080AIBT operates by receiving control signals from the input pins (IN1 to IN4) and generating corresponding gate drive signals for the high-side and low-side outputs. These gate drive signals control the switching of power MOSFETs, enabling the desired motor operation. The integrated bootstrap diodes provide the necessary voltage supply for the high-side gate drivers.

Detailed Application Field Plans

The HIP4080AIBT finds extensive application in various motor control systems, including but not limited to:

  1. Electric vehicles: Controlling the motors used in electric vehicle propulsion systems.
  2. Industrial automation: Precise control of motors in industrial machinery and robotics.
  3. HVAC systems: Motor control for heating, ventilation, and air conditioning systems.
  4. Consumer electronics: Motor control in appliances such as fans, pumps, and kitchen equipment.
  5. Renewable energy systems: Efficient control of motors in wind turbines and solar tracking systems.

Detailed and Complete Alternative Models

For motor control applications similar to the HIP4080A

Énumérez 10 questions et réponses courantes liées à l'application de HIP4080AIBT dans les solutions techniques

Sure! Here are 10 common questions and answers related to the application of HIP4080AIBT in technical solutions:

  1. Q: What is HIP4080AIBT? A: HIP4080AIBT is a high-frequency, medium-voltage Full Bridge N-Channel FET driver IC designed for applications such as motor control, power supplies, and inverters.

  2. Q: What is the maximum voltage rating of HIP4080AIBT? A: The maximum voltage rating of HIP4080AIBT is typically around 80V.

  3. Q: Can HIP4080AIBT drive both high-side and low-side MOSFETs? A: Yes, HIP4080AIBT can drive both high-side and low-side N-Channel MOSFETs.

  4. Q: What is the maximum switching frequency supported by HIP4080AIBT? A: HIP4080AIBT supports a maximum switching frequency of up to 1MHz.

  5. Q: Does HIP4080AIBT have built-in protection features? A: Yes, HIP4080AIBT includes various protection features like under-voltage lockout (UVLO), over-temperature shutdown, and shoot-through protection.

  6. Q: How many inputs does HIP4080AIBT have? A: HIP4080AIBT has four independent inputs, allowing for flexible control of the bridge configuration.

  7. Q: Can HIP4080AIBT be used in automotive applications? A: Yes, HIP4080AIBT is suitable for automotive applications as it meets the necessary requirements for automotive-grade components.

  8. Q: What is the recommended operating temperature range for HIP4080AIBT? A: The recommended operating temperature range for HIP4080AIBT is typically -40°C to +125°C.

  9. Q: Can HIP4080AIBT be used in high-power applications? A: Yes, HIP4080AIBT can be used in high-power applications as it can handle high currents and voltages.

  10. Q: Are there any evaluation boards or reference designs available for HIP4080AIBT? A: Yes, Intersil (now Renesas Electronics) provides evaluation boards and reference designs for HIP4080AIBT, which can help users get started with their applications.

Please note that the answers provided here are general and may vary depending on specific application requirements and datasheet specifications.