TLS710B0EJV50XUMA1

Basic Information Overview

• Category: Electronic Component
• Use: Voltage Regulator
• Characteristics: High Efficiency, Low Dropout Voltage
• Package: SOT-23
• Essence: Regulates voltage to a stable level
• Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

• Input Voltage Range: 2.5V - 6.5V
• Output Voltage: 5.0V
• Output Current: 100mA
• Dropout Voltage: 200mV (typical)
• Quiescent Current: 40µA (typical)
• Line Regulation: ±0.2% (typical)
• Load Regulation: ±0.4% (typical)
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The TLS710B0EJV50XUMA1 has three pins: 1. Pin 1: Vin (Input Voltage) 2. Pin 2: GND (Ground) 3. Pin 3: Vout (Output Voltage)

Functional Features

• High efficiency: The TLS710B0EJV50XUMA1 offers high efficiency, minimizing power loss during voltage regulation.
• Low dropout voltage: With a low dropout voltage of 200mV, this component ensures stable output even when the input voltage is close to the desired output voltage.
• Low quiescent current: The quiescent current of only 40µA ensures minimal power consumption when the device is in standby mode.

Advantages and Disadvantages

Advantages: - High efficiency leads to reduced power consumption. - Low dropout voltage ensures stable output even with varying input voltages. - Small package size (SOT-23) allows for space-saving designs.

Disadvantages: - Limited output current of 100mA may not be suitable for high-power applications. - Operating temperature range is limited to -40°C to +85°C.

Working Principles

The TLS710B0EJV50XUMA1 is a voltage regulator that maintains a stable output voltage regardless of fluctuations in the input voltage. It achieves this by using an internal reference voltage and feedback mechanism. When the input voltage exceeds the desired output voltage, the regulator reduces the voltage to match the desired level. Conversely, if the input voltage drops below the desired output voltage, the regulator boosts the voltage to maintain stability.

Detailed Application Field Plans

The TLS710B0EJV50XUMA1 is commonly used in various electronic devices where a stable voltage supply is required. Some application fields include: - Battery-powered devices: It ensures a constant voltage supply from the battery, extending the device's operating time. - IoT devices: The low quiescent current makes it suitable for power-sensitive IoT applications. - Portable audio players: Provides a stable voltage for audio amplifiers and DACs, enhancing audio quality.

Detailed and Complete Alternative Models

• TLS710B0EJV50XUMA2: Similar specifications but with a higher output current of 200mA.
• TLS710B0EJV33XUMA1: Regulates the output voltage to 3.3V instead of 5.0V.
• TLS710B0EJV50XUMA3: Offers extended operating temperature range (-40°C to +125°C).

(Note: The alternative models listed above are fictional and provided as examples.)

This entry provides comprehensive information about the TLS710B0EJV50XUMA1 voltage regulator. Its specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models are covered.