Infineon Technologies
L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
TLE72593GEXUMA1
Voir les détails DataSheets

TLE72593GEXUMA1

Product Overview

Category

The TLE72593GEXUMA1 belongs to the category of integrated circuits (ICs).

Use

This IC is primarily used for communication and control purposes in automotive applications.

Characteristics

  • High-speed CAN transceiver
  • Supports data rates up to 5 Mbps
  • Low electromagnetic emissions
  • Robust design for harsh automotive environments

Package

The TLE72593GEXUMA1 is available in a small outline package (SOP) with 8 pins.

Essence

The essence of this product lies in its ability to facilitate reliable and efficient communication between various electronic components within an automotive system.

Packaging/Quantity

The TLE72593GEXUMA1 is typically packaged in reels, containing a quantity of 250 units per reel.

Specifications

  • Supply voltage: 4.5V to 5.5V
  • Operating temperature range: -40°C to +125°C
  • Standby current: 10µA (typical)
  • Transmitting current: 120mA (typical)
  • Receiving current: 30mA (typical)

Detailed Pin Configuration

The TLE72593GEXUMA1 features the following pin configuration:

  1. VCC - Power supply input
  2. GND - Ground connection
  3. TXD - Transmit data input
  4. RXD - Receive data output
  5. STB - Standby mode control input
  6. CANH - CAN high-level input/output
  7. CANL - CAN low-level input/output
  8. VIO - IO voltage selection input

Functional Features

  • High-speed transmission and reception of CAN bus signals
  • Protection against electrostatic discharge (ESD)
  • Thermal shutdown protection
  • Wake-up capability from standby mode
  • Low electromagnetic emissions for improved system performance

Advantages and Disadvantages

Advantages

  • High-speed data transfer enables efficient communication in automotive systems.
  • Robust design ensures reliable operation in harsh environments.
  • ESD protection safeguards the IC from damage during handling and installation.

Disadvantages

  • Limited IO voltage selection options may restrict compatibility with certain systems.
  • Higher power consumption compared to some alternative models.

Working Principles

The TLE72593GEXUMA1 operates based on the Controller Area Network (CAN) protocol. It receives data from the transmitting node, processes it, and transmits it to the receiving node. The IC incorporates various features to ensure signal integrity, such as noise suppression and error detection.

Detailed Application Field Plans

The TLE72593GEXUMA1 is widely used in automotive applications, including:

  1. Vehicle control units
  2. Body electronics
  3. Powertrain systems
  4. Infotainment systems
  5. Advanced driver-assistance systems (ADAS)

Detailed and Complete Alternative Models

  1. TLE7259-3GE - Similar high-speed CAN transceiver with a different pin configuration.
  2. SN65HVD230 - CAN transceiver with lower power consumption but slower data rate.
  3. MCP2551 - Cost-effective CAN transceiver with limited features but suitable for basic applications.

(Note: This list is not exhaustive and there are several other alternative models available in the market.)

Word count: 436 words

Énumérez 10 questions et réponses courantes liées à l'application de TLE72593GEXUMA1 dans les solutions techniques

Sure! Here are 10 common questions and answers related to the application of TLE72593GEXUMA1 in technical solutions:

Q1: What is TLE72593GEXUMA1? A1: TLE72593GEXUMA1 is a high-speed CAN transceiver designed for use in automotive and industrial applications.

Q2: What is the maximum data rate supported by TLE72593GEXUMA1? A2: TLE72593GEXUMA1 supports a maximum data rate of 5 Mbps.

Q3: Can TLE72593GEXUMA1 be used in harsh environments? A3: Yes, TLE72593GEXUMA1 is designed to operate in harsh environments with a wide temperature range and high electromagnetic compatibility (EMC) requirements.

Q4: What is the supply voltage range for TLE72593GEXUMA1? A4: TLE72593GEXUMA1 operates with a supply voltage range from 4.5V to 5.5V.

Q5: Does TLE72593GEXUMA1 support bus fault protection? A5: Yes, TLE72593GEXUMA1 features integrated bus fault protection, including thermal shutdown and short-circuit protection.

Q6: Can TLE72593GEXUMA1 be used in multi-node networks? A6: Yes, TLE72593GEXUMA1 can be used in multi-node networks, supporting up to 120 nodes.

Q7: What is the typical quiescent current consumption of TLE72593GEXUMA1? A7: The typical quiescent current consumption of TLE72593GEXUMA1 is around 5 mA.

Q8: Does TLE72593GEXUMA1 support wake-up functionality? A8: Yes, TLE72593GEXUMA1 supports wake-up functionality, allowing the device to be activated from a low-power sleep mode.

Q9: Can TLE72593GEXUMA1 be used in safety-critical applications? A9: Yes, TLE72593GEXUMA1 is suitable for safety-critical applications and complies with relevant automotive safety standards.

Q10: What is the package type of TLE72593GEXUMA1? A10: TLE72593GEXUMA1 is available in a small VSON-8 package, which is compact and space-saving.

Please note that these answers are general and may vary depending on the specific application and requirements.