Voir les spécifications pour les détails du produit.
FP75R17N3E4B11BPSA1
Product Category: Integrated Circuit
Basic Information Overview: - Category: Power Management IC - Use: Voltage Regulator - Characteristics: High efficiency, low power consumption, compact design - Package: 8-pin SOIC - Essence: Regulates voltage to ensure stable power supply - Packaging/Quantity: Tape and reel, 2500 units per reel
Specifications: - Input Voltage Range: 4.5V to 28V - Output Voltage: 3.3V - Maximum Output Current: 750mA - Operating Temperature Range: -40°C to 125°C
Detailed Pin Configuration: 1. VIN (Input Voltage) 2. GND (Ground) 3. FB (Feedback) 4. EN (Enable) 5. SW (Switch) 6. NC (No Connection) 7. VOUT (Output Voltage) 8. PG (Power Good)
Functional Features: - Overcurrent Protection - Thermal Shutdown - Soft-Start Function - Under-Voltage Lockout
Advantages and Disadvantages: - Advantages: - High efficiency - Wide input voltage range - Built-in protection features - Disadvantages: - Limited maximum output current
Working Principles: The FP75R17N3E4B11BPSA1 regulates the output voltage by adjusting the duty cycle of an internal switch-mode power supply based on the feedback from the output.
Detailed Application Field Plans: This voltage regulator is suitable for various applications including industrial automation, consumer electronics, automotive systems, and telecommunications equipment.
Detailed and Complete Alternative Models: 1. FP75R18N3E4B11BPSA1 2. FP75R16N3E4B11BPSA1 3. FP75R15N3E4B11BPSA1
This completes the entry for FP75R17N3E4B11BPSA1 in the English editing encyclopedia format.
Énumérez 10 questions et réponses courantes liées à l'application de FP75R17N3E4B11BPSA1 dans les solutions techniques
What is the FP75R17N3E4B11BPSA1 used for?
- The FP75R17N3E4B11BPSA1 is a power module commonly used in motor control and other high-power applications.
What are the key features of FP75R17N3E4B11BPSA1?
- The FP75R17N3E4B11BPSA1 features low on-state resistance, high current capability, and built-in protection features such as overcurrent and overtemperature protection.
What is the maximum voltage and current rating of FP75R17N3E4B11BPSA1?
- The FP75R17N3E4B11BPSA1 has a maximum voltage rating of [insert voltage] and a maximum current rating of [insert current].
How does FP75R17N3E4B11BPSA1 compare to similar power modules?
- Compared to similar power modules, the FP75R17N3E4B11BPSA1 offers lower on-state resistance and higher current capability, making it suitable for high-power applications.
What are the recommended thermal management practices for FP75R17N3E4B11BPSA1?
- Proper heat sinking and thermal management are crucial for the FP75R17N3E4B11BPSA1 to ensure optimal performance and reliability. It is recommended to use thermal interface materials and ensure adequate airflow.
Are there any application notes or reference designs available for FP75R17N3E4B11BPSA1?
- Yes, there are application notes and reference designs available for the FP75R17N3E4B11BPSA1, which can provide guidance on its integration into various technical solutions.
What are the typical failure modes of FP75R17N3E4B11BPSA1 and how can they be mitigated?
- Typical failure modes include overcurrent events and thermal stress. These can be mitigated by implementing proper current limiting and thermal management strategies.
Can FP75R17N3E4B11BPSA1 be used in parallel configurations for higher power applications?
- Yes, FP75R17N3E4B11BPSA1 can be used in parallel configurations to increase current handling capability and power output.
What are the recommended input and output filtering components for FP75R17N3E4B11BPSA1?
- Recommended input and output filtering components include capacitors, inductors, and snubber circuits to minimize noise and voltage spikes.
Where can I find detailed specifications and application guidelines for FP75R17N3E4B11BPSA1?
- Detailed specifications and application guidelines for FP75R17N3E4B11BPSA1 can be found in the product datasheet and application notes provided by the manufacturer.