Infineon Technologies
L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
BTS61101SJAXUMA2
Voir les détails DataSheets

BTS61101SJAXUMA2

Product Overview

  • Category: Power Switch
  • Use: Control and protection of loads in automotive applications
  • Characteristics: High-side power switch, integrated protection features, compact package
  • Package: Surface mount package (SMD)
  • Essence: Efficient and reliable control of high-current loads
  • Packaging/Quantity: Tape and reel packaging, 2500 units per reel

Specifications

  • Voltage Range: 5V to 40V
  • Current Rating: Up to 30A
  • On-State Resistance: Typically 10mΩ
  • Operating Temperature Range: -40°C to +150°C
  • Protection Features: Overtemperature shutdown, overcurrent protection, short-circuit protection

Detailed Pin Configuration

The BTS61101SJAXUMA2 power switch has the following pin configuration:

  1. IN: Input pin for controlling the switch
  2. OUT: Output pin connected to the load
  3. GND: Ground reference pin
  4. EN: Enable pin for turning the switch on/off
  5. PGND: Power ground pin for internal circuitry

Functional Features

  • High-side power switch with integrated protection features
  • Low on-state resistance for efficient power delivery
  • Fast switching capability for rapid load control
  • Overtemperature shutdown protects against excessive heat
  • Overcurrent and short-circuit protection ensure load safety

Advantages and Disadvantages

Advantages: - Compact size allows for space-saving designs - Integrated protection features enhance system reliability - Wide voltage range enables versatile application possibilities - High current rating supports demanding load requirements

Disadvantages: - Relatively high on-state resistance may cause power dissipation - Limited operating temperature range compared to some alternatives

Working Principles

The BTS61101SJAXUMA2 power switch operates by controlling the flow of current from the input pin (IN) to the output pin (OUT). When the enable pin (EN) is activated, the switch turns on and allows current to flow through the load. The integrated protection features monitor the operating conditions and provide safeguards against overtemperature, overcurrent, and short-circuit events.

Detailed Application Field Plans

The BTS61101SJAXUMA2 power switch finds applications in various automotive systems, including:

  1. Electric power steering
  2. Engine control units
  3. Transmission control modules
  4. Lighting systems
  5. HVAC systems
  6. Battery management systems

Its compact size, high current rating, and integrated protection features make it suitable for controlling and protecting loads in these automotive applications.

Detailed and Complete Alternative Models

  1. BTS6143D: Similar high-side power switch with additional diagnostic features
  2. BTS50085-1TMA: Power switch with lower on-state resistance and higher current rating
  3. BTS621L1E3128A: High-side power switch with extended temperature range and enhanced protection features

These alternative models offer different specifications and features, providing flexibility in selecting the most suitable power switch for specific application requirements.

Word count: 366 words

Énumérez 10 questions et réponses courantes liées à l'application de BTS61101SJAXUMA2 dans les solutions techniques

Sure! Here are 10 common questions and answers related to the application of BTS61101SJAXUMA2 in technical solutions:

  1. Q: What is BTS61101SJAXUMA2? A: BTS61101SJAXUMA2 is a high-side power switch used for controlling and protecting loads in automotive and industrial applications.

  2. Q: What is the maximum voltage and current rating of BTS61101SJAXUMA2? A: The maximum voltage rating is typically 40V, and the maximum current rating is typically 1A.

  3. Q: What are the typical applications of BTS61101SJAXUMA2? A: It is commonly used in various automotive systems such as lighting control, motor control, and power distribution modules. It can also be used in industrial automation and other similar applications.

  4. Q: How does BTS61101SJAXUMA2 provide load protection? A: It incorporates various protection features like overcurrent protection, overtemperature protection, and short-circuit protection to safeguard the connected load.

  5. Q: Can BTS61101SJAXUMA2 handle inductive loads? A: Yes, it is designed to handle inductive loads, but additional external components may be required for proper operation.

  6. Q: Does BTS61101SJAXUMA2 have built-in diagnostics or fault reporting capabilities? A: No, BTS61101SJAXUMA2 does not have built-in diagnostics or fault reporting features.

  7. Q: What is the operating temperature range of BTS61101SJAXUMA2? A: The operating temperature range is typically -40°C to +150°C.

  8. Q: Can BTS61101SJAXUMA2 be controlled using a microcontroller? A: Yes, it can be controlled using a microcontroller by providing appropriate control signals to its input pins.

  9. Q: Does BTS61101SJAXUMA2 require an external power supply? A: No, it does not require an external power supply as it is powered directly from the system voltage.

  10. Q: Is BTS61101SJAXUMA2 suitable for automotive applications? A: Yes, it is specifically designed for automotive applications and meets the required automotive standards.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.