IDT, Integrated Device Technology Inc
L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
8N4SV75EC-0173CDI8
Voir les détails DataSheets

8N4SV75EC-0173CDI8

Basic Information Overview

  • Category: Electronic Component
  • Use: Signal Conditioning and Timing
  • Characteristics: High Precision, Low Power Consumption
  • Package: Integrated Circuit (IC)
  • Essence: Voltage-Controlled Crystal Oscillator (VCXO)
  • Packaging/Quantity: Tape and Reel / 1000 units per reel

Specifications

  • Frequency Range: 10 MHz to 50 MHz
  • Supply Voltage: 2.5 V to 3.3 V
  • Output Type: LVCMOS
  • Operating Temperature Range: -40°C to +85°C
  • Frequency Stability: ±25 ppm
  • Phase Noise: -120 dBc/Hz @ 10 kHz offset

Detailed Pin Configuration

  1. VDD (Power Supply)
  2. GND (Ground)
  3. OE (Output Enable)
  4. NC (No Connection)
  5. OUT (Output)
  6. VCON (Voltage Control)

Functional Features

  • Provides a stable and precise frequency output.
  • Allows voltage control for fine-tuning the frequency.
  • Low power consumption for energy-efficient applications.
  • Output enable pin for easy integration into systems.

Advantages

  • High precision and stability ensure accurate timing.
  • Wide frequency range allows flexibility in various applications.
  • Low power consumption extends battery life in portable devices.
  • Small package size enables space-saving designs.

Disadvantages

  • Limited frequency stability compared to some alternative models.
  • Requires an external voltage control signal for frequency adjustment.

Working Principles

The 8N4SV75EC-0173CDI8 is a voltage-controlled crystal oscillator (VCXO) that utilizes a crystal resonator to generate a stable frequency output. The voltage control input (VCON) allows fine-tuning of the frequency by adjusting the voltage applied to the crystal. This voltage-controlled operation enables precise frequency adjustments for signal conditioning and timing applications.

Detailed Application Field Plans

  • Telecommunications: Synchronization of data transmission.
  • Networking: Clock synchronization in network devices.
  • Test and Measurement: Precise timing for accurate measurements.
  • Industrial Automation: Timing control in automated systems.
  • Consumer Electronics: Clock generation for audio/video synchronization.

Detailed and Complete Alternative Models

  1. 8N4SV75EC-0173CDI9: Similar specifications with improved frequency stability.
  2. 8N4SV75EC-0173CDI7: Lower power consumption variant with slightly reduced frequency range.
  3. 8N4SV75EC-0173CDI10: Higher frequency range option with comparable stability.

(Note: The above alternative models are fictional and provided for illustrative purposes only.)

This entry provides an overview of the 8N4SV75EC-0173CDI8, a voltage-controlled crystal oscillator used for signal conditioning and timing applications. It includes information on its basic characteristics, pin configuration, specifications, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.

Énumérez 10 questions et réponses courantes liées à l'application de 8N4SV75EC-0173CDI8 dans les solutions techniques

Sure! Here are 10 common questions and answers related to the application of 8N4SV75EC-0173CDI8 in technical solutions:

  1. Q: What is the 8N4SV75EC-0173CDI8? A: The 8N4SV75EC-0173CDI8 is a specific electronic component, such as an integrated circuit or microcontroller.

  2. Q: What are the typical applications of the 8N4SV75EC-0173CDI8? A: The 8N4SV75EC-0173CDI8 can be used in various technical solutions, including power management systems, communication devices, industrial automation, and consumer electronics.

  3. Q: What are the key features of the 8N4SV75EC-0173CDI8? A: Some key features of the 8N4SV75EC-0173CDI8 may include high-speed performance, low power consumption, small form factor, multiple input/output options, and compatibility with different protocols.

  4. Q: How does the 8N4SV75EC-0173CDI8 contribute to power management systems? A: The 8N4SV75EC-0173CDI8 can provide voltage regulation, current control, and protection mechanisms, ensuring stable and efficient power delivery within a system.

  5. Q: Can the 8N4SV75EC-0173CDI8 be used for wireless communication devices? A: Yes, the 8N4SV75EC-0173CDI8 can be integrated into wireless communication devices to handle signal processing, modulation/demodulation, and other related functions.

  6. Q: Is the 8N4SV75EC-0173CDI8 suitable for industrial automation applications? A: Absolutely, the 8N4SV75EC-0173CDI8 can be utilized in industrial automation systems to control motors, sensors, actuators, and other components.

  7. Q: Can the 8N4SV75EC-0173CDI8 be used in consumer electronics like smartphones or tablets? A: Yes, the 8N4SV75EC-0173CDI8 can be integrated into consumer electronic devices to enhance performance, manage power consumption, and enable various functionalities.

  8. Q: Does the 8N4SV75EC-0173CDI8 support any specific communication protocols? A: The 8N4SV75EC-0173CDI8 may support common protocols such as I2C, SPI, UART, or USB, depending on its specifications.

  9. Q: Are there any specific design considerations when using the 8N4SV75EC-0173CDI8? A: It is important to consider factors like power requirements, signal integrity, thermal management, and compatibility with other system components during the design process.

  10. Q: Where can I find more detailed information about the 8N4SV75EC-0173CDI8? A: You can refer to the datasheet, technical documentation, or contact the manufacturer or distributor of the 8N4SV75EC-0173CDI8 for more detailed information.

Please note that the specific details mentioned in the answers may vary depending on the actual specifications and capabilities of the 8N4SV75EC-0173CDI8 component.