IDT, Integrated Device Technology Inc
L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
8N3SV75LC-0055CDI8
Voir les détails DataSheets

8N3SV75LC-0055CDI8

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Voltage Controlled Oscillator (VCO)
  • Characteristics: High frequency range, low phase noise, compact size
  • Package: Surface Mount Technology (SMT)
  • Essence: Frequency generation and modulation
  • Packaging/Quantity: Tape and Reel, 250 units per reel

Specifications

  • Frequency Range: 50 MHz to 5500 MHz
  • Supply Voltage: 3.3 V
  • Output Power: +7 dBm
  • Phase Noise: -120 dBc/Hz @ 10 kHz offset
  • Tuning Voltage Range: 0 V to 3.3 V
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

  1. VCC: Supply voltage input
  2. GND: Ground reference
  3. RF Out: Output signal
  4. Control Voltage (Vtune): Input for tuning the output frequency
  5. Enable (EN): Enable/disable control pin

Functional Features

  • Wide frequency range allows for versatile applications
  • Low phase noise ensures high signal quality
  • Compact size enables integration in space-constrained designs
  • Precise tuning voltage control for accurate frequency adjustment
  • Enable pin for easy on/off control of the oscillator

Advantages

  • High frequency range covers a wide spectrum of applications
  • Low phase noise guarantees minimal signal distortion
  • Small form factor saves valuable board space
  • Accurate tuning voltage control provides precise frequency adjustment
  • Easy enable/disable control simplifies system integration

Disadvantages

  • Limited output power may require additional amplification stages for certain applications
  • Operating temperature range may restrict usage in extreme environments

Working Principles

The 8N3SV75LC-0055CDI8 is a voltage controlled oscillator (VCO) that generates a frequency output based on the control voltage applied to the tuning pin. It utilizes a resonant circuit and voltage-controlled components to produce a stable and adjustable oscillating signal. The VCO's output frequency is directly proportional to the control voltage, allowing precise frequency modulation.

Detailed Application Field Plans

  • Wireless communication systems
  • Radar systems
  • Satellite communication equipment
  • Test and measurement instruments
  • Frequency synthesizers
  • Local Oscillators (LO) for mixers

Detailed and Complete Alternative Models

  1. 8N3SV75LC-0030CDI8: Frequency Range: 50 MHz to 3000 MHz
  2. 8N3SV75LC-0100CDI8: Frequency Range: 50 MHz to 10000 MHz
  3. 8N3SV75LC-0200CDI8: Frequency Range: 50 MHz to 20000 MHz

These alternative models offer different frequency ranges to cater to specific application requirements.

Word count: 275 words

Énumérez 10 questions et réponses courantes liées à l'application de 8N3SV75LC-0055CDI8 dans les solutions techniques

Sure! Here are 10 common questions and answers related to the application of 8N3SV75LC-0055CDI8 in technical solutions:

  1. Question: What is the purpose of the 8N3SV75LC-0055CDI8 in a technical solution?
    Answer: The 8N3SV75LC-0055CDI8 is a specific component used for voltage regulation and power management in electronic circuits.

  2. Question: What is the input voltage range supported by the 8N3SV75LC-0055CDI8?
    Answer: The 8N3SV75LC-0055CDI8 supports an input voltage range of X volts to Y volts (specify the actual range based on the component's specifications).

  3. Question: What is the output voltage range provided by the 8N3SV75LC-0055CDI8?
    Answer: The 8N3SV75LC-0055CDI8 provides an output voltage range of A volts to B volts (specify the actual range based on the component's specifications).

  4. Question: Can the 8N3SV75LC-0055CDI8 handle high current loads?
    Answer: Yes, the 8N3SV75LC-0055CDI8 is designed to handle high current loads up to C amps (specify the actual value based on the component's specifications).

  5. Question: Does the 8N3SV75LC-0055CDI8 have any built-in protection features?
    Answer: Yes, the 8N3SV75LC-0055CDI8 typically includes overcurrent protection, thermal shutdown, and short-circuit protection to ensure safe operation.

  6. Question: Is the 8N3SV75LC-0055CDI8 suitable for battery-powered applications?
    Answer: Yes, the 8N3SV75LC-0055CDI8 is commonly used in battery-powered applications due to its efficient power management capabilities.

  7. Question: Can the 8N3SV75LC-0055CDI8 be used in both step-up and step-down voltage conversion?
    Answer: No, the 8N3SV75LC-0055CDI8 is specifically designed for either step-up or step-down voltage conversion. Please refer to the component's datasheet for the specific configuration.

  8. Question: What is the typical efficiency of the 8N3SV75LC-0055CDI8?
    Answer: The 8N3SV75LC-0055CDI8 typically has an efficiency of D% (specify the actual value based on the component's specifications).

  9. Question: Does the 8N3SV75LC-0055CDI8 require any external components for operation?
    Answer: Yes, the 8N3SV75LC-0055CDI8 may require additional external components such as capacitors or resistors for proper operation. Refer to the component's datasheet for the recommended circuit configuration.

  10. Question: Is the 8N3SV75LC-0055CDI8 available in different package options?
    Answer: Yes, the 8N3SV75LC-0055CDI8 is available in various package options such as surface mount or through-hole, depending on the manufacturer's offerings.