Encyclopedia Entry: 74LVC16373APAG8

Product Overview

Category

The 74LVC16373APAG8 belongs to the category of integrated circuits (ICs) and specifically falls under the group of flip-flops and latches.

Use

This product is commonly used in digital electronics for data storage and transfer applications. It serves as an octal transparent latch with 3-state outputs.

Characteristics

• Octal transparent latch
• 3-state outputs
• High-speed operation
• Low power consumption
• Wide operating voltage range
• Schmitt-trigger action on all inputs
• Balanced propagation delays

Package

The 74LVC16373APAG8 is available in a 48-pin TSSOP (Thin Shrink Small Outline Package) format.

Essence

The essence of this product lies in its ability to store and transfer data efficiently within digital systems, providing reliable and high-speed operation.

Packaging/Quantity

The 74LVC16373APAG8 is typically packaged in reels or tubes, containing a quantity of 250 units per package.

Specifications

• Supply Voltage Range: 1.2V to 3.6V
• Input Voltage Range: -0.5V to VCC + 0.5V
• Output Voltage Range: -0.5V to VCC + 0.5V
• Operating Temperature Range: -40°C to +85°C
• Maximum Clock Frequency: 100 MHz

Detailed Pin Configuration

The 74LVC16373APAG8 has a total of 48 pins, each serving a specific function. The pin configuration is as follows:

1. Pin 1: Output Enable (OE)
2. Pin 2: Data Input D0
3. Pin 3: Data Input D1
4. Pin 4: Data Input D2
5. Pin 5: Data Input D3
6. Pin 6: Data Input D4
7. Pin 7: Data Input D5
8. Pin 8: Data Input D6
9. Pin 9: Data Input D7
10. Pin 10: GND (Ground)
11. Pin 11: Data Output Q0
12. Pin 12: Data Output Q1
13. Pin 13: Data Output Q2
14. Pin 14: Data Output Q3
15. Pin 15: Data Output Q4
16. Pin 16: Data Output Q5
17. Pin 17: Data Output Q6
18. Pin 18: Data Output Q7
19. Pin 19: Clock Input (CLK)
20. Pin 20: VCC (Supply Voltage)

(Continuation of pin configuration...)

Functional Features

The 74LVC16373APAG8 offers the following functional features:

1. Octal Transparent Latch: Allows data to be stored and latched onto the outputs.
2. 3-State Outputs: Provides the ability to disconnect the outputs from the internal circuitry, allowing multiple devices to share a common bus.
3. High-Speed Operation: Enables fast data transfer within digital systems.
4. Low Power Consumption: Ensures efficient power usage, reducing energy consumption.
5. Wide Operating Voltage Range: Allows compatibility with various voltage levels.
6. Schmitt-Trigger Action on All Inputs: Enhances noise immunity and signal integrity.
7. Balanced Propagation Delays: Ensures consistent timing across all outputs.

Advantages and Disadvantages

Advantages

• High-speed operation facilitates quick data transfer.
• Low power consumption reduces energy usage.
• Wide operating voltage range provides flexibility in system design.
• Schmitt-trigger action enhances noise immunity.
• Balanced propagation delays ensure consistent timing.

Disadvantages

• Limited to octal (8-bit) data storage and transfer.
• Requires careful consideration of input and output voltage levels for proper operation.

Working Principles

The 74LVC16373APAG8 operates based on the principles of latch-based memory storage. When the clock input (CLK) is triggered, the data inputs (D0-D7) are latched onto the outputs (Q0-Q7). The latch remains transparent as long as the output enable (OE) signal is active. The 3-state outputs allow multiple devices to share a common bus by enabling or disabling their connection to the internal circuitry.

Detailed Application Field Plans

The 74LVC16373APAG8 finds applications in various digital systems, including but not limited to:

1. Microcontrollers and microprocessors
2. Data communication systems
3. Memory modules
4. Industrial automation
5. Automotive electronics
6. Consumer electronics

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the 74LVC16373APAG8 include: