IDT, Integrated Device Technology Inc
L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
74FCT3245APGG
Voir les détails DataSheets

Encyclopedia Entry: 74FCT3245APGG

Product Overview

Category

The 74FCT3245APGG belongs to the category of integrated circuits (ICs) and specifically falls under the group of bus transceivers.

Use

This product is commonly used for bidirectional data communication between buses with different voltage levels. It enables the transfer of digital signals between systems operating at different voltage levels, ensuring compatibility and efficient data transmission.

Characteristics

  • Bidirectional data transfer
  • Voltage level translation
  • High-speed operation
  • Low power consumption
  • Robust design for reliable performance

Package

The 74FCT3245APGG is available in a standard 48-pin plastic TSSOP (Thin Shrink Small Outline Package) package. This package offers good thermal dissipation and ease of handling during assembly.

Essence

The essence of the 74FCT3245APGG lies in its ability to facilitate seamless data transfer between buses operating at different voltage levels, ensuring compatibility and efficient communication.

Packaging/Quantity

The product is typically supplied in reels or tubes, with each reel/tube containing a specific quantity of 74FCT3245APGG ICs. The exact quantity may vary depending on the supplier and customer requirements.

Specifications

  • Supply Voltage: 2.0V - 5.5V
  • Input Voltage Levels: 0V - VCC
  • Output Voltage Levels: 0V - VCC
  • Maximum Data Rate: 200 Mbps
  • Operating Temperature Range: -40°C to +85°C
  • Input/Output Type: Tri-State

Detailed Pin Configuration

The 74FCT3245APGG has a total of 48 pins, which are assigned specific functions as follows:

  1. A1 - Bus A, Data Bit 1
  2. A2 - Bus A, Data Bit 2
  3. A3 - Bus A, Data Bit 3
  4. A4 - Bus A, Data Bit 4
  5. A5 - Bus A, Data Bit 5
  6. A6 - Bus A, Data Bit 6
  7. A7 - Bus A, Data Bit 7
  8. A8 - Bus A, Data Bit 8
  9. GND - Ground
  10. OE - Output Enable
  11. B1 - Bus B, Data Bit 1
  12. B2 - Bus B, Data Bit 2
  13. B3 - Bus B, Data Bit 3
  14. B4 - Bus B, Data Bit 4
  15. B5 - Bus B, Data Bit 5
  16. B6 - Bus B, Data Bit 6
  17. B7 - Bus B, Data Bit 7
  18. B8 - Bus B, Data Bit 8
  19. VCC - Supply Voltage
  20. DIR - Direction Control 21-48: Reserved/Other Pins

Functional Features

  • Bidirectional data transfer between buses with different voltage levels
  • Automatic voltage level translation for seamless communication
  • Tri-State outputs for efficient bus sharing
  • High-speed operation for quick data transmission
  • Low power consumption for energy efficiency
  • Robust design for reliable performance in various applications

Advantages and Disadvantages

Advantages

  • Enables communication between systems with different voltage levels
  • Supports high-speed data transfer
  • Low power consumption helps conserve energy
  • Robust design ensures reliability
  • Tri-State outputs allow efficient bus sharing

Disadvantages

  • May require additional components for proper voltage level translation
  • Limited to a maximum data rate of 200 Mbps

Working Principles

The 74FCT3245APGG operates by receiving data from one bus and transmitting it to another bus, while automatically translating the voltage levels between them. The direction of data transfer is controlled by the DIR pin. When enabled, the IC allows bidirectional communication, and when disabled, it enters a high-impedance state, effectively isolating the buses.

Detailed Application Field Plans

The 74FCT3245APGG finds applications in various fields where data communication between systems operating at different voltage levels is required. Some common application areas include:

  1. Industrial automation
  2. Telecommunications
  3. Automotive electronics
  4. Consumer electronics
  5. Computer peripherals

Detailed and Complete Alternative Models

  1. SN74LVC245A: This is an alternative bus transceiver IC with similar functionality but operates at a lower voltage range.
  2. MC74LVX245: Another alternative IC that provides bidirectional voltage level translation for bus communication.
  3. CD74HCT245: A higher-speed alternative IC suitable for applications requiring faster data transfer rates.

These alternative models offer similar features and can be considered based on specific requirements and compatibility with the system.

*Word Count:

Énumérez 10 questions et réponses courantes liées à l'application de 74FCT3245APGG dans les solutions techniques

Sure! Here are 10 common questions and answers related to the application of 74FCT3245APGG in technical solutions:

  1. Q: What is the function of the 74FCT3245APGG? A: The 74FCT3245APGG is an octal bus transceiver with tri-state outputs, used for bidirectional data transfer between different voltage levels.

  2. Q: What is the operating voltage range of the 74FCT3245APGG? A: The 74FCT3245APGG operates within a voltage range of 4.5V to 5.5V.

  3. Q: Can the 74FCT3245APGG be used for level shifting between different voltage domains? A: Yes, the 74FCT3245APGG can be used for level shifting between different voltage domains, as it supports bidirectional data transfer.

  4. Q: What is the maximum data transfer rate supported by the 74FCT3245APGG? A: The 74FCT3245APGG supports high-speed data transfer up to 200MHz.

  5. Q: How many channels does the 74FCT3245APGG have? A: The 74FCT3245APGG has 8 bidirectional channels.

  6. Q: Can the 74FCT3245APGG be used in both parallel and serial communication systems? A: Yes, the 74FCT3245APGG can be used in both parallel and serial communication systems, depending on the application requirements.

  7. Q: Does the 74FCT3245APGG have built-in protection features? A: Yes, the 74FCT3245APGG has built-in ESD protection on all inputs and outputs.

  8. Q: What is the power supply current consumption of the 74FCT3245APGG? A: The power supply current consumption of the 74FCT3245APGG is typically around 20mA.

  9. Q: Can the 74FCT3245APGG be used in automotive applications? A: Yes, the 74FCT3245APGG is suitable for automotive applications as it meets the necessary standards and has a wide operating temperature range.

  10. Q: Are there any specific layout considerations when using the 74FCT3245APGG? A: Yes, it is recommended to follow the manufacturer's guidelines for proper PCB layout, including proper decoupling capacitors placement and minimizing trace lengths to reduce noise and signal integrity issues.

Please note that these answers are general and may vary depending on the specific application and requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information and application-specific questions.