IDT, Integrated Device Technology Inc
L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
74FCT162374ATPVG
Voir les détails DataSheets

Encyclopedia Entry: 74FCT162374ATPVG

Product Overview

Category

The 74FCT162374ATPVG belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in digital systems for data storage and transfer.

Characteristics

  • High-speed operation
  • Low power consumption
  • Wide operating voltage range
  • Compatibility with various logic families

Package

The 74FCT162374ATPVG is available in a standard 48-pin TSSOP (Thin Shrink Small Outline Package) package.

Essence

This IC serves as a transparent latch with 16-bit D-type flip-flops. It enables efficient data storage and transfer within digital systems.

Packaging/Quantity

The 74FCT162374ATPVG is typically packaged in reels or tubes, with quantities varying based on customer requirements.

Specifications

  • Operating Voltage Range: 2.0V to 5.5V
  • Input Voltage Range: 0V to VCC
  • Output Voltage Range: 0V to VCC
  • Maximum Clock Frequency: 100 MHz
  • Propagation Delay Time: 3.5 ns (typical)
  • Output Drive Capability: ±24 mA

Detailed Pin Configuration

The 74FCT162374ATPVG has a total of 48 pins, each serving a specific function. The pin configuration is as follows:

  1. Pin 1: Output Enable (OE)
  2. Pin 2: Data Input (D0)
  3. Pin 3: Data Input (D1)
  4. Pin 4: Data Input (D2)
  5. Pin 5: Data Input (D3)
  6. Pin 6: Data Input (D4)
  7. Pin 7: Data Input (D5)
  8. Pin 8: Data Input (D6)
  9. Pin 9: Data Input (D7)
  10. Pin 10: Data Input (D8)
  11. Pin 11: Data Input (D9)
  12. Pin 12: Data Input (D10)
  13. Pin 13: Data Input (D11)
  14. Pin 14: Data Input (D12)
  15. Pin 15: Data Input (D13)
  16. Pin 16: Data Input (D14)
  17. Pin 17: Data Input (D15)
  18. Pin 18: Clock (CLK)
  19. Pin 19: Output (Q0)
  20. Pin 20: Output (Q1)
  21. Pin 21: Output (Q2)
  22. Pin 22: Output (Q3)
  23. Pin 23: Output (Q4)
  24. Pin 24: Output (Q5)
  25. Pin 25: Output (Q6)
  26. Pin 26: Output (Q7)
  27. Pin 27: Output (Q8)
  28. Pin 28: Output (Q9)
  29. Pin 29: Output (Q10)
  30. Pin 30: Output (Q11)
  31. Pin 31: Output (Q12)
  32. Pin 32: Output (Q13)
  33. Pin 33: Output (Q14)
  34. Pin 34: Output (Q15)
  35. Pin 35: GND (Ground)
  36. Pin 36: GND (Ground)
  37. Pin 37: GND (Ground)
  38. Pin 38: GND (Ground)
  39. Pin 39: VCC (Power Supply)
  40. Pin 40: VCC (Power Supply)
  41. Pin 41: VCC (Power Supply)
  42. Pin 42: VCC (Power Supply)
  43. Pin 43: Output Enable (OE)
  44. Pin 44: Clock (CLK)
  45. Pin 45: Data Input (D15)
  46. Pin 46: Data Input (D14)
  47. Pin 47: Data Input (D13)
  48. Pin 48: Data Input (D12)

Functional Features

  • Transparent latch with 16-bit D-type flip-flops
  • High-speed data storage and transfer
  • Compatibility with various logic families
  • Low power consumption

Advantages and Disadvantages

Advantages

  • High-speed operation allows for efficient data processing.
  • Wide operating voltage range enables compatibility with different systems.
  • Low power consumption reduces energy requirements.
  • Compatibility with various logic families enhances versatility.

Disadvantages

  • Limited output drive capability may restrict use in certain applications.
  • Propagation delay time may affect real-time data processing.

Working Principles

The 74FCT162374ATPVG operates as a transparent latch with 16-bit D-type flip-flops. It stores and transfers data based on the clock signal provided

Énumérez 10 questions et réponses courantes liées à l'application de 74FCT162374ATPVG dans les solutions techniques

Sure! Here are 10 common questions and answers related to the application of 74FCT162374ATPVG in technical solutions:

1. What is the 74FCT162374ATPVG? The 74FCT162374ATPVG is a type of integrated circuit (IC) known as an octal D-type flip-flop with 3-state outputs.

2. What is the purpose of the 74FCT162374ATPVG? This IC is commonly used for data storage and transfer in digital systems. It can store and output 8 bits of data.

3. What voltage levels does the 74FCT162374ATPVG support? The 74FCT162374ATPVG supports both TTL (Transistor-Transistor Logic) and CMOS (Complementary Metal-Oxide-Semiconductor) voltage levels.

4. What is the maximum operating frequency of the 74FCT162374ATPVG? The maximum operating frequency of this IC is typically around 200 MHz.

5. How many pins does the 74FCT162374ATPVG have? The 74FCT162374ATPVG has a total of 48 pins.

6. Can the 74FCT162374ATPVG be used in both input and output applications? Yes, this IC can be used for both input and output applications, depending on the specific requirements of the system.

7. Does the 74FCT162374ATPVG have any built-in protection features? Yes, the 74FCT162374ATPVG has built-in ESD (Electrostatic Discharge) protection to prevent damage from static electricity.

8. What is the power supply voltage range for the 74FCT162374ATPVG? The recommended power supply voltage range for this IC is typically between 4.5V and 5.5V.

9. Can the 74FCT162374ATPVG be cascaded to increase the number of bits stored? Yes, multiple 74FCT162374ATPVG ICs can be cascaded together to increase the number of bits stored and transferred.

10. Are there any specific layout considerations when using the 74FCT162374ATPVG? Yes, it is important to follow the recommended layout guidelines provided in the datasheet to ensure proper signal integrity and minimize noise interference.

Please note that these answers are general and may vary depending on the specific application and requirements. It is always recommended to refer to the datasheet and consult with technical experts for accurate and detailed information.