Honeywell Sensing and Productivity Solutions
L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
103SR13A-2
Voir les détails DataSheets

103SR13A-2

Product Overview

  • Category: Sensor
  • Use: Position sensing in industrial applications
  • Characteristics: High precision, durable, compact design
  • Package: Sealed housing
  • Essence: Accurate position detection
  • Packaging/Quantity: Individual units

Specifications

  • Type: Linear Hall Effect Sensor
  • Output: Analog voltage
  • Operating Voltage: 4.5V to 6V
  • Current Consumption: 6mA
  • Temperature Range: -40°C to 125°C
  • Linearity: ±1%

Detailed Pin Configuration

  • Pin 1: Vcc (Power supply)
  • Pin 2: GND (Ground)
  • Pin 3: Output

Functional Features

  • Precise linear position detection
  • Compact and rugged design
  • Wide operating temperature range
  • Low power consumption

Advantages

  • High accuracy
  • Durable construction
  • Suitable for harsh environments
  • Low power consumption

Disadvantages

  • Limited output options
  • Requires external signal conditioning for some applications

Working Principles

The 103SR13A-2 operates based on the Hall Effect, where a magnetic field influences the movement of charge carriers within the sensor, resulting in a measurable output voltage proportional to the applied magnetic field.

Detailed Application Field Plans

  • Industrial automation: Position feedback for robotic arms and conveyor systems
  • Automotive: Throttle position sensing, gearbox position detection
  • Aerospace: Flight control surface position monitoring

Detailed and Complete Alternative Models

  • 104SR15B-3: Higher temperature range, digital output
  • 102SR12C-1: Lower power consumption, smaller form factor

This comprehensive entry provides an in-depth understanding of the 103SR13A-2 sensor, including its specifications, functional features, advantages, disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.

Énumérez 10 questions et réponses courantes liées à l'application de 103SR13A-2 dans les solutions techniques

  1. What is 103SR13A-2?

    • 103SR13A-2 is a type of temperature sensor, specifically a thermistor, commonly used in technical solutions for measuring and controlling temperature.

  2. How does 103SR13A-2 work?

    • 103SR13A-2 operates based on the principle that its electrical resistance changes with temperature. As the temperature increases, the resistance decreases, and vice versa.

  3. What is the temperature range for 103SR13A-2?

    • The temperature range for 103SR13A-2 typically varies, but it is commonly used for measuring temperatures within the range of -50°C to 150°C.

  4. What are the typical applications of 103SR13A-2?

    • 103SR13A-2 is commonly used in applications such as HVAC systems, automotive temperature control, medical devices, and industrial equipment where precise temperature measurement and control are required.

  5. How accurate is 103SR13A-2?

    • The accuracy of 103SR13A-2 can vary depending on the specific model and calibration, but it generally offers high accuracy in temperature measurement, often within a few degrees Celsius.

  6. Can 103SR13A-2 be used in harsh environments?

    • Yes, 103SR13A-2 is designed to withstand harsh environments and is often used in industrial settings where it may be exposed to moisture, dust, or other challenging conditions.

  7. What are the wiring requirements for 103SR13A-2?

    • Typically, 103SR13A-2 requires simple two-wire connection, with attention to polarity, and it can be easily integrated into existing control systems.

  8. Is calibration necessary for 103SR13A-2?

    • Calibration is recommended for 103SR13A-2 to ensure accurate temperature measurements, especially if high precision is required for the application.

  9. Can 103SR13A-2 be used for both heating and cooling applications?

    • Yes, 103SR13A-2 can be utilized for both heating and cooling applications, making it versatile for various temperature control needs.

  10. Are there any special considerations for installing 103SR13A-2?

    • It's important to ensure proper thermal contact with the measured object and to protect the sensor from mechanical stress or excessive vibration during installation.

Please let me know if you need further information on any of these questions!