FT24C16A-UTR-T belongs to the category of electrically erasable programmable read-only memory (EEPROM) chips.
This product is primarily used for non-volatile data storage in various electronic devices such as microcontrollers, computers, and consumer electronics.
FT24C16A-UTR-T is available in a small outline transistor (SOT-23) package. It is typically sold in reels containing a quantity of 3000 units.
FT24C16A-UTR-T has a total of 8 pins arranged as follows:
```
| | | U1 | |___________|
Pin Configuration: 1. A0 - Address input bit 0 2. A1 - Address input bit 1 3. A2 - Address input bit 2 4. GND - Ground 5. SDA - Serial data input/output 6. SCL - Serial clock input 7. WP - Write protect 8. VCC - Power supply voltage ```
FT24C16A-UTR-T utilizes EEPROM technology, which is based on floating-gate transistors. Data is stored by trapping electric charge in the floating gate, altering the transistor's threshold voltage. This trapped charge represents a binary value (0 or 1). The data can be read by applying appropriate voltages to the memory cells and sensing the resulting current flow.
During a write operation, the desired data is loaded into a temporary buffer and then programmed into the memory cells. Erasing the data involves removing the trapped charge from the floating gate, resetting the cell to its initial state.
FT24C16A-UTR-T finds applications in various fields, including: 1. Embedded systems: Used for storing configuration data, calibration values, and firmware updates. 2. Automotive electronics: Employed in vehicle control units for storing critical information like mileage, fault codes, and user preferences. 3. Smart meters: Utilized for recording energy consumption data and maintaining billing records. 4. Industrial automation: Used for storing parameters, settings, and production data in programmable logic controllers (PLCs). 5. Consumer electronics: Incorporated into devices like smart TVs, set-top boxes, and digital cameras for storing user preferences and settings.
Several alternative models to FT24C16A-UTR-T are available in the market. Some notable alternatives include: - AT24C16 from Atmel - CAT24C16 from ON Semiconductor - M24C16 from STMicroelectronics - 24AA16 from Microchip Technology
These alternatives offer similar functionality and compatibility with different systems, providing customers with a range of options to suit their specific requirements.
In conclusion, FT24C16A-UTR-T is an EEPROM chip that offers non-volatile data
Sure! Here are 10 common questions and answers related to the application of FT24C16A-UTR-T in technical solutions:
Q: What is FT24C16A-UTR-T? A: FT24C16A-UTR-T is a specific model of EEPROM (Electrically Erasable Programmable Read-Only Memory) chip.
Q: What is the capacity of FT24C16A-UTR-T? A: FT24C16A-UTR-T has a capacity of 16 kilobits, which is equivalent to 2 kilobytes.
Q: What is the operating voltage range for FT24C16A-UTR-T? A: The operating voltage range for FT24C16A-UTR-T is typically between 1.7V and 5.5V.
Q: What is the maximum clock frequency supported by FT24C16A-UTR-T? A: FT24C16A-UTR-T supports a maximum clock frequency of 400 kHz.
Q: Can FT24C16A-UTR-T be used for storing program code? A: No, FT24C16A-UTR-T is primarily designed for storing small amounts of non-volatile data, such as configuration settings or calibration data.
Q: Is FT24C16A-UTR-T compatible with I2C communication protocol? A: Yes, FT24C16A-UTR-T uses the I2C (Inter-Integrated Circuit) communication protocol for interfacing with microcontrollers or other devices.
Q: Does FT24C16A-UTR-T have built-in write protection? A: Yes, FT24C16A-UTR-T provides hardware write protection by using a dedicated pin (WP) or software write protection through specific commands.
Q: Can FT24C16A-UTR-T operate in extreme temperature conditions? A: Yes, FT24C16A-UTR-T is designed to operate in a wide temperature range, typically from -40°C to +85°C.
Q: What is the typical endurance of FT24C16A-UTR-T? A: FT24C16A-UTR-T has a typical endurance of 1 million write cycles, meaning it can be written and erased up to 1 million times before potential failure.
Q: Is FT24C16A-UTR-T RoHS compliant? A: Yes, FT24C16A-UTR-T is compliant with the Restriction of Hazardous Substances (RoHS) directive, ensuring it meets environmental standards.
Please note that these answers are general and may vary depending on the specific datasheet and manufacturer's specifications for FT24C16A-UTR-T.