L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
FT24C16A-USG-B

FT24C16A-USG-B

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Non-volatile Memory
  • Characteristics:
    • Low power consumption
    • High reliability
    • Small package size
  • Package: SOP-8
  • Essence: EEPROM (Electrically Erasable Programmable Read-Only Memory)
  • Packaging/Quantity: Tape and Reel, 2500 pieces per reel

Specifications

  • Memory Size: 16 Kilobits (2 Kilobytes)
  • Interface: I2C (Inter-Integrated Circuit)
  • Operating Voltage: 1.7V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Write Cycle Endurance: 1 Million Cycles
  • Data Retention: 100 Years

Detailed Pin Configuration

The FT24C16A-USG-B IC has a total of 8 pins arranged as follows:

┌───┬───┐ │ 1 │ 8 │ │ │ │ └───┴───┘

Pin Description: 1. SDA: Serial Data Input/Output 2. SCL: Serial Clock Input 3. A0: Address Input Bit 0 4. A1: Address Input Bit 1 5. A2: Address Input Bit 2 6. WP: Write Protect Input 7. VSS: Ground 8. VCC: Power Supply

Functional Features

  • Byte-wise Read and Write Operations
  • Random and Sequential Read Modes
  • Software Write Protection
  • Hardware Write Protection (WP pin)
  • Self-timed Write Cycle
  • Acknowledge Polling for End of Write Detection

Advantages

  • Low power consumption makes it suitable for battery-powered devices
  • High reliability ensures data integrity in critical applications
  • Small package size saves board space and allows for compact designs

Disadvantages

  • Limited memory size may not be sufficient for certain applications
  • I2C interface may have slower data transfer rates compared to other interfaces

Working Principles

The FT24C16A-USG-B is an EEPROM, which means it can store and retrieve digital information even when the power is turned off. It utilizes electrically controlled floating gate transistors to store data. The I2C interface allows for easy communication with microcontrollers or other devices.

Detailed Application Field Plans

The FT24C16A-USG-B is commonly used in various electronic devices that require non-volatile memory storage. Some application fields include: - Consumer Electronics: TVs, Set-top Boxes, Audio Players - Automotive: Dashboard Displays, Infotainment Systems - Industrial Control Systems: Data Loggers, Sensor Calibration

Detailed and Complete Alternative Models

  • FT24C08A-USG-B: 8 Kilobits (1 Kilobyte) memory size
  • FT24C32A-USG-B: 32 Kilobits (4 Kilobytes) memory size
  • FT24C64A-USG-B: 64 Kilobits (8 Kilobytes) memory size

Note: Alternative models may vary in specifications and pin configuration.

This encyclopedia entry provides a comprehensive overview of the FT24C16A-USG-B IC, including its basic information, specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.

Énumérez 10 questions et réponses courantes liées à l'application de FT24C16A-USG-B dans les solutions techniques

Sure! Here are 10 common questions and answers related to the application of FT24C16A-USG-B in technical solutions:

  1. Q: What is FT24C16A-USG-B? A: FT24C16A-USG-B is a specific model of an I2C-compatible EEPROM (Electrically Erasable Programmable Read-Only Memory) chip.

  2. Q: What is the capacity of FT24C16A-USG-B? A: FT24C16A-USG-B has a capacity of 16 kilobits, which is equivalent to 2 kilobytes.

  3. Q: How can FT24C16A-USG-B be used in technical solutions? A: FT24C16A-USG-B can be used for storing small amounts of non-volatile data, such as configuration settings or calibration data, in various electronic devices.

  4. Q: What is the communication protocol supported by FT24C16A-USG-B? A: FT24C16A-USG-B supports the I2C (Inter-Integrated Circuit) communication protocol.

  5. Q: What is the operating voltage range of FT24C16A-USG-B? A: FT24C16A-USG-B operates within a voltage range of 1.7V to 5.5V.

  6. Q: Can FT24C16A-USG-B be used in both industrial and consumer applications? A: Yes, FT24C16A-USG-B is suitable for use in both industrial and consumer applications due to its wide operating voltage range.

  7. Q: Does FT24C16A-USG-B support hardware write protection? A: Yes, FT24C16A-USG-B provides hardware write protection through a dedicated pin (WP) that can be used to prevent accidental writes.

  8. Q: What is the maximum frequency at which FT24C16A-USG-B can operate? A: FT24C16A-USG-B can operate at a maximum clock frequency of 400 kHz.

  9. Q: Can FT24C16A-USG-B withstand high temperatures? A: Yes, FT24C16A-USG-B has an extended temperature range and can operate reliably in temperatures ranging from -40°C to +85°C.

  10. Q: Is FT24C16A-USG-B RoHS compliant? A: Yes, FT24C16A-USG-B is compliant with the Restriction of Hazardous Substances (RoHS) directive, ensuring it meets environmental standards.

Please note that these answers are general and may vary depending on the specific application or use case.