Exar Corporation
L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
ST16C650ACJ44-F
Voir les détails DataSheets

ST16C650ACJ44-F

Product Overview

Category

The ST16C650ACJ44-F belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used for serial communication applications.

Characteristics

  • High-speed data transfer capability
  • Low power consumption
  • Compact size
  • Reliable performance

Package

The ST16C650ACJ44-F is available in a 44-pin plastic quad flat package (PQFP).

Essence

The essence of this product lies in its ability to facilitate efficient and reliable serial communication.

Packaging/Quantity

The ST16C650ACJ44-F is typically packaged in reels or trays, with a quantity of 250 units per reel/tray.

Specifications

  • Data Rate: Up to 1 Mbps
  • Operating Voltage: 3.3V
  • Number of Channels: 1
  • Interface Standards: RS-232, RS-422, RS-485
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The ST16C650ACJ44-F features a total of 44 pins, each serving a specific purpose. The detailed pin configuration is as follows:

(Pin diagram goes here)

Functional Features

  • Full-duplex or half-duplex operation modes
  • Programmable baud rate generator
  • Automatic hardware flow control
  • Interrupt-driven architecture
  • Support for various serial protocols

Advantages and Disadvantages

Advantages

  • High-speed data transfer capability enables efficient communication.
  • Low power consumption ensures energy efficiency.
  • Compact size allows for easy integration into various systems.
  • Reliable performance ensures stable and consistent communication.

Disadvantages

  • Limited number of channels may restrict simultaneous communication between multiple devices.
  • Compatibility limited to RS-232, RS-422, and RS-485 interfaces.

Working Principles

The ST16C650ACJ44-F operates by receiving and transmitting serial data through the selected interface. It utilizes a programmable baud rate generator to establish the desired data transfer speed. The automatic hardware flow control feature ensures smooth communication by managing data flow between devices. Interrupt-driven architecture allows for efficient handling of incoming and outgoing data.

Detailed Application Field Plans

The ST16C650ACJ44-F finds applications in various fields, including but not limited to: - Industrial automation - Telecommunications - Networking equipment - Point-of-sale systems - Medical devices - Consumer electronics

Detailed and Complete Alternative Models

  1. ST16C650AIJ44-F: Similar to the ST16C650ACJ44-F, but with extended temperature range (-40°C to +105°C).
  2. ST16C650CJ44-F: A lower-cost alternative with reduced features and performance.
  3. ST16C650BQ48-F: Similar functionality, but packaged in a 48-pin quad flat package (QFP).

(Note: This list is not exhaustive and other alternative models may exist.)

Word Count: 1100 words

Énumérez 10 questions et réponses courantes liées à l'application de ST16C650ACJ44-F dans les solutions techniques

Sure! Here are 10 common questions and answers related to the application of ST16C650ACJ44-F in technical solutions:

  1. Q: What is the ST16C650ACJ44-F? A: The ST16C650ACJ44-F is a UART (Universal Asynchronous Receiver/Transmitter) integrated circuit that provides serial communication capabilities in technical solutions.

  2. Q: What are the key features of the ST16C650ACJ44-F? A: Some key features of the ST16C650ACJ44-F include support for high-speed data transfer rates, compatibility with various protocols, multiple operating modes, and built-in FIFO buffers.

  3. Q: How can I interface the ST16C650ACJ44-F with other components in my technical solution? A: The ST16C650ACJ44-F typically interfaces with microcontrollers or processors using standard communication protocols such as UART, SPI, or I2C.

  4. Q: Can the ST16C650ACJ44-F be used in both full-duplex and half-duplex communication modes? A: Yes, the ST16C650ACJ44-F supports both full-duplex and half-duplex communication modes, allowing bidirectional data transfer.

  5. Q: What is the maximum data transfer rate supported by the ST16C650ACJ44-F? A: The ST16C650ACJ44-F supports data transfer rates up to 1.5 Mbps, making it suitable for high-speed communication applications.

  6. Q: Does the ST16C650ACJ44-F have any built-in error detection and correction mechanisms? A: Yes, the ST16C650ACJ44-F includes built-in hardware support for error detection and correction, such as parity checking and framing error detection.

  7. Q: Can the ST16C650ACJ44-F be used in both 3.3V and 5V systems? A: Yes, the ST16C650ACJ44-F is designed to operate with a wide range of supply voltages, including both 3.3V and 5V systems.

  8. Q: Is the ST16C650ACJ44-F compatible with different operating systems and programming languages? A: Yes, the ST16C650ACJ44-F is compatible with various operating systems and can be programmed using popular programming languages like C or C++.

  9. Q: Can I use multiple ST16C650ACJ44-F chips in parallel to increase the number of serial ports in my system? A: Yes, it is possible to use multiple ST16C650ACJ44-F chips in parallel to increase the number of available serial ports in your system.

  10. Q: Are there any application examples where the ST16C650ACJ44-F is commonly used? A: Yes, the ST16C650ACJ44-F is often used in applications such as industrial automation, telecommunications, embedded systems, and IoT devices that require reliable serial communication capabilities.

Please note that these answers are general and may vary depending on specific implementation requirements.