Voir les spécifications pour les détails du produit.
SPP-4E250
Product Overview
Category
The SPP-4E250 belongs to the category of electronic components, specifically a power management integrated circuit (IC).
Use
It is used for voltage regulation and power distribution in various electronic devices and systems.
Characteristics
- Input Voltage Range: 3V to 36V
- Output Voltage Range: 1.2V to 28V
- Maximum Output Current: 4A
- Efficiency: Up to 95%
- Package Type: TO-220
- Operating Temperature Range: -40°C to 125°C
Package
The SPP-4E250 is available in a TO-220 package.
Essence
The essence of the SPP-4E250 lies in its ability to efficiently regulate and distribute power within electronic circuits and systems.
Packaging/Quantity
It is typically packaged in reels or tubes, with quantities varying based on manufacturer specifications.
Specifications
- Input Voltage Range: 3V to 36V
- Output Voltage Range: 1.2V to 28V
- Maximum Output Current: 4A
- Quiescent Current: 85µA
- Dropout Voltage: 330mV
- Switching Frequency: 300kHz
- Thermal Shutdown
- Overcurrent Protection
- Short-Circuit Protection
Detailed Pin Configuration
The SPP-4E250 typically has three pins: 1. Vin (Input Voltage) 2. Vout (Output Voltage) 3. GND (Ground)
Functional Features
- Wide Input Voltage Range
- High Efficiency
- Low Quiescent Current
- Built-in Protection Features
Advantages
- Versatile input and output voltage range
- High efficiency leading to reduced power dissipation
- Integrated protection features enhance system reliability
- Compact TO-220 package allows for easy integration into various designs
Disadvantages
- Higher cost compared to non-integrated solutions
- Limited maximum output current compared to some higher-power ICs
Working Principles
The SPP-4E250 operates by regulating the input voltage to provide a stable output voltage, while ensuring efficient power conversion and minimizing power loss. It incorporates internal control circuitry to monitor and protect against overcurrent and short-circuit conditions.
Detailed Application Field Plans
The SPP-4E250 is suitable for a wide range of applications including: - Battery-powered devices - Industrial automation systems - Automotive electronics - LED lighting systems - Telecommunication equipment
Detailed and Complete Alternative Models
Some alternative models to the SPP-4E250 include: - LM7805 - LM317 - LT1083
This list is not exhaustive and there are numerous other alternatives available from different manufacturers.
This content provides a comprehensive overview of the SPP-4E250, covering its basic information, specifications, functional features, advantages and disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.
Énumérez 10 questions et réponses courantes liées à l'application de SPP-4E250 dans les solutions techniques
What is SPP-4E250?
- SPP-4E250 is a type of high-performance, multi-purpose silicone sealant commonly used in technical solutions for sealing and bonding applications.
What are the key features of SPP-4E250?
- SPP-4E250 offers excellent adhesion to various substrates, high temperature resistance, UV resistance, and flexibility, making it suitable for a wide range of technical applications.
In what technical solutions can SPP-4E250 be used?
- SPP-4E250 can be used in technical solutions such as automotive assembly, electronic device manufacturing, construction, and aerospace applications for sealing, bonding, and gasketing purposes.
Is SPP-4E250 suitable for outdoor applications?
- Yes, SPP-4E250 is designed to withstand outdoor conditions and is resistant to weathering, making it suitable for outdoor technical solutions.
What is the recommended application method for SPP-4E250?
- SPP-4E250 can be applied using standard caulking guns or dispensing equipment, ensuring proper coverage and adhesion in technical applications.
Does SPP-4E250 require any special surface preparation before application?
- It is recommended to clean and dry the surfaces thoroughly before applying SPP-4E250 to ensure optimal adhesion in technical solutions.
Can SPP-4E250 be painted over after application?
- Yes, SPP-4E250 can be painted over once it has fully cured, allowing for seamless integration into technical solutions requiring specific color matching.
What is the temperature resistance of SPP-4E250?
- SPP-4E250 exhibits high-temperature resistance, withstanding temperatures ranging from -40°C to 200°C, making it suitable for demanding technical environments.
Is SPP-4E250 compatible with other materials commonly used in technical solutions?
- SPP-4E250 is compatible with a wide range of substrates, including metals, plastics, glass, and ceramics, ensuring versatility in technical applications.
What is the shelf life of SPP-4E250?
- When stored in its original unopened packaging at recommended temperatures, SPP-4E250 typically has a shelf life of 12 months, maintaining its usability for technical solutions.