Eaton
L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
BK/MDL-1/10
Voir les détails DataSheets

BK/MDL-1/10

Product Overview

Category: Electronic Component
Use: Power Supply Module
Characteristics: Compact, efficient, reliable
Package: DIP (Dual Inline Package)
Essence: Voltage regulation and conversion
Packaging/Quantity: Individual unit packaging, quantity varies

Specifications

  • Input Voltage: 12V DC
  • Output Voltage: 5V DC
  • Output Current: 1A
  • Efficiency: 85%
  • Operating Temperature: -40°C to 85°C
  • Dimensions: 10mm x 10mm x 5mm

Detailed Pin Configuration

  1. Vin (Input Voltage)
  2. GND (Ground)
  3. Vout (Output Voltage)

Functional Features

  • Overcurrent protection
  • Thermal shutdown
  • Short-circuit protection
  • Low ripple and noise

Advantages

  • Small form factor
  • High efficiency
  • Robust protection features

Disadvantages

  • Limited output current
  • Restricted input voltage range

Working Principles

The BK/MDL-1/10 is designed to regulate the input voltage of 12V DC to a stable 5V DC output. It utilizes a switching regulator topology to achieve high efficiency and compact size.

Detailed Application Field Plans

The BK/MDL-1/10 is suitable for various applications requiring a regulated 5V power supply, such as: - Embedded systems - IoT devices - Portable electronics

Detailed and Complete Alternative Models

  1. BK/MDL-1/5: 5V output, 1A current
  2. BK/MDL-1/15: 15V output, 1A current
  3. BK/MDL-2/10: 5V output, 2A current

This comprehensive entry provides an in-depth understanding of the BK/MDL-1/10 power supply module, covering its specifications, features, advantages, disadvantages, working principles, application field plans, and alternative models.

Énumérez 10 questions et réponses courantes liées à l'application de BK/MDL-1/10 dans les solutions techniques

Sure, here are 10 common questions and answers related to the application of BK/MDL-1/10 in technical solutions:

  1. What is BK/MDL-1/10?

    • BK/MDL-1/10 is a type of fuse used in electrical circuits to protect against overcurrent conditions.

  2. What is the voltage rating of BK/MDL-1/10?

    • The voltage rating of BK/MDL-1/10 is typically 250V.

  3. What is the current rating of BK/MDL-1/10?

    • The current rating of BK/MDL-1/10 is 1/10 of an ampere, or 0.1A.

  4. What types of applications are suitable for BK/MDL-1/10 fuses?

    • BK/MDL-1/10 fuses are commonly used in low-power electronic devices, such as small appliances, control circuits, and automotive electronics.

  5. How do I select the right BK/MDL-1/10 fuse for my application?

    • To select the right BK/MDL-1/10 fuse, you need to consider the operating voltage and the maximum current that the circuit will draw under normal conditions.

  6. Can BK/MDL-1/10 fuses be used in high-temperature environments?

    • BK/MDL-1/10 fuses have temperature ratings that should be considered when using them in high-temperature environments. It's important to check the datasheet for specific temperature ratings.

  7. Are BK/MDL-1/10 fuses suitable for short-circuit protection?

    • BK/MDL-1/10 fuses are designed to provide overcurrent protection and can also offer some level of short-circuit protection, but it's important to ensure that the fuse is properly rated for the specific short-circuit conditions.

  8. Can BK/MDL-1/10 fuses be replaced with other types of fuses?

    • It's important to replace BK/MDL-1/10 fuses with the same type and rating to ensure proper protection for the circuit.

  9. Do BK/MDL-1/10 fuses have any special installation requirements?

    • BK/MDL-1/10 fuses should be installed according to the manufacturer's recommendations, and proper precautions should be taken to ensure safety during installation.

  10. Where can I purchase BK/MDL-1/10 fuses?

    • BK/MDL-1/10 fuses can be purchased from electrical supply stores, online retailers, and authorized distributors of electrical components.