Voir les spécifications pour les détails du produit.
BK/1A5780
Product Overview
Category: Electronic Component
Use: Power Management
Characteristics: High efficiency, compact design
Package: SMD (Surface Mount Device)
Essence: Voltage Regulator
Packaging/Quantity: Tape and Reel, 3000 units per reel
Specifications
- Input Voltage: 4.5V to 28V
- Output Voltage: Adjustable from 0.8V to 5.5V
- Output Current: Up to 3A
- Dropout Voltage: 330mV at 3A
- Operating Temperature Range: -40°C to 125°C
- Package Type: TO-263-5L
Detailed Pin Configuration
- VIN (Input Voltage)
- GND (Ground)
- FB (Feedback)
- EN (Enable)
- VOUT (Output Voltage)
Functional Features
- Wide input voltage range
- High efficiency up to 95%
- Low dropout voltage
- Overcurrent and thermal protection
- Adjustable output voltage
Advantages and Disadvantages
Advantages: - Compact size - High efficiency - Wide input voltage range - Overcurrent and thermal protection
Disadvantages: - Limited maximum output current - Sensitive to external noise
Working Principles
The BK/1A5780 is a voltage regulator that takes an input voltage within the specified range and provides a stable output voltage. It uses a feedback mechanism to adjust the output voltage based on the reference voltage.
Detailed Application Field Plans
The BK/1A5780 is suitable for various applications including: - Portable electronic devices - Automotive electronics - Industrial power supplies - LED lighting systems
Detailed and Complete Alternative Models
- LM317 - Adjustable Voltage Regulator
- LT1083 - Low Dropout Regulator
- LM7805 - Fixed Voltage Regulator
This completes the English editing encyclopedia entry structure for BK/1A5780, covering its product details, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.
Énumérez 10 questions et réponses courantes liées à l'application de BK/1A5780 dans les solutions techniques
Sure, here are 10 common questions and answers related to the application of BK/1A5780 in technical solutions:
What is BK/1A5780?
- BK/1A5780 is a high-performance adhesive sealant commonly used in aerospace and aviation applications.
What are the key features of BK/1A5780?
- BK/1A5780 offers excellent adhesion to a wide range of substrates, high temperature resistance, and superior chemical resistance.
How is BK/1A5780 applied?
- BK/1A5780 is typically applied using standard caulking guns or pneumatic dispensing equipment.
What are the typical applications for BK/1A5780?
- BK/1A5780 is commonly used for sealing and bonding in aircraft structures, fuel tanks, and other critical aerospace components.
Is BK/1A5780 suitable for use in extreme environments?
- Yes, BK/1A5780 is designed to withstand extreme temperatures, vibration, and exposure to fuels and hydraulic fluids.
What is the shelf life of BK/1A5780?
- The shelf life of BK/1A5780 is typically around 12 months when stored in its original, unopened containers at recommended temperatures.
Can BK/1A5780 be painted over?
- Yes, BK/1A5780 can be painted over once it has fully cured.
Does BK/1A5780 require special surface preparation before application?
- Yes, surfaces should be clean, dry, and free from contaminants before applying BK/1A5780 for optimal adhesion.
What are the curing time and temperature requirements for BK/1A5780?
- Curing time and temperature requirements may vary, but typically, BK/1A5780 cures at room temperature within 24 hours.
Is BK/1A5780 compliant with industry standards and regulations?
- Yes, BK/1A5780 meets various aerospace and aviation industry standards and specifications for adhesives and sealants.
I hope these questions and answers provide the information you were looking for! Let me know if you need further assistance.