Diodes Incorporated
L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
PI5V330QEX
Voir les détails DataSheets

PI5V330QEX

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Voltage Level Translator
  • Characteristics: High-speed, low-power, bidirectional voltage level translation
  • Package: QFN (Quad Flat No-leads) package
  • Essence: Translates signals between different voltage levels
  • Packaging/Quantity: Available in tape and reel packaging, quantity varies based on supplier

Specifications

  • Supply Voltage Range: 1.2V to 3.6V
  • Input Voltage Range (A Port): 0V to VCCA + 0.5V
  • Input Voltage Range (B Port): 0V to VCCB + 0.5V
  • Output Voltage Range (A Port): 0V to VCCA + 0.5V
  • Output Voltage Range (B Port): 0V to VCCB + 0.5V
  • Maximum Data Rate: 100 Mbps
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The PI5V330QEX has a total of 20 pins. The pin configuration is as follows:

  1. OE (Output Enable)
  2. A1 (A Port Data Input/Output 1)
  3. A2 (A Port Data Input/Output 2)
  4. A3 (A Port Data Input/Output 3)
  5. A4 (A Port Data Input/Output 4)
  6. GND (Ground)
  7. B4 (B Port Data Input/Output 4)
  8. B3 (B Port Data Input/Output 3)
  9. B2 (B Port Data Input/Output 2)
  10. B1 (B Port Data Input/Output 1)
  11. VCCA (A Port Supply Voltage)
  12. VCCB (B Port Supply Voltage)
  13. VCC (Supply Voltage)
  14. B5 (B Port Data Input/Output 5)
  15. B6 (B Port Data Input/Output 6)
  16. A5 (A Port Data Input/Output 5)
  17. A6 (A Port Data Input/Output 6)
  18. GND (Ground)
  19. NC (No Connection)
  20. OE (Output Enable)

Functional Features

  • Bidirectional voltage level translation between two different voltage domains
  • Supports high-speed data transmission up to 100 Mbps
  • Low-power consumption for energy-efficient operation
  • Output enable pin allows for easy control of signal translation

Advantages and Disadvantages

Advantages

  • High-speed data transmission capability
  • Low-power consumption
  • Bidirectional voltage level translation
  • Compact QFN package for space-saving designs

Disadvantages

  • Limited maximum data rate compared to some alternative models
  • May not support voltage levels outside the specified range

Working Principles

The PI5V330QEX is designed to translate signals between two different voltage domains. It utilizes a combination of level shifters and voltage regulators to ensure accurate and reliable signal translation. The input voltage from one domain is converted to the corresponding output voltage in the other domain, allowing seamless communication between devices operating at different voltage levels.

Detailed Application Field Plans

The PI5V330QEX can be used in various applications that require voltage level translation. Some potential application fields include:

  1. Microcontrollers and microprocessors interfacing with different voltage peripherals
  2. Communication systems involving multiple voltage domains
  3. Industrial automation and control systems
  4. Consumer electronics devices with mixed voltage interfaces
  5. Automotive electronics for voltage compatibility between different subsystems

Detailed and Complete Alternative Models

  1. TXS0108E: 8-bit bidirectional voltage level translator with higher maximum data rate
  2. SN74LVC1T45: Single-bit bidirectional voltage level translator with lower power consumption
  3. PCA9306: Dual bidirectional voltage level translator with automatic direction sensing

These alternative models offer similar functionality to the PI5V330QEX and can be considered based on specific requirements and constraints.

Word count: 445 words

Énumérez 10 questions et réponses courantes liées à l'application de PI5V330QEX dans les solutions techniques

Sure! Here are 10 common questions and answers related to the application of PI5V330QEX in technical solutions:

  1. Question: What is the PI5V330QEX?
    - Answer: The PI5V330QEX is a voltage level translator IC designed for bidirectional voltage translation between different logic levels.

  2. Question: What is the operating voltage range of the PI5V330QEX?
    - Answer: The PI5V330QEX operates with a supply voltage range from 1.2V to 3.6V.

  3. Question: What are the logic levels supported by the PI5V330QEX?
    - Answer: The PI5V330QEX supports logic levels such as TTL, CMOS, and LVCMOS.

  4. Question: Can the PI5V330QEX be used for bidirectional voltage translation?
    - Answer: Yes, the PI5V330QEX is specifically designed for bidirectional voltage translation applications.

  5. Question: What is the maximum data rate supported by the PI5V330QEX?
    - Answer: The PI5V330QEX can support data rates up to 100 Mbps.

  6. Question: Does the PI5V330QEX require external pull-up or pull-down resistors?
    - Answer: No, the PI5V330QEX has built-in pull-up and pull-down resistors, eliminating the need for external components.

  7. Question: Can the PI5V330QEX be used in I2C or SPI communication interfaces?
    - Answer: Yes, the PI5V330QEX can be used in I2C or SPI interfaces for voltage level translation between different devices.

  8. Question: What is the package type of the PI5V330QEX?
    - Answer: The PI5V330QEX is available in a small footprint 8-pin SOIC package.

  9. Question: Is the PI5V330QEX suitable for battery-powered applications?
    - Answer: Yes, the PI5V330QEX operates with low power consumption and is suitable for battery-powered applications.

  10. Question: Can multiple PI5V330QEX devices be cascaded together for higher voltage translation levels?
    - Answer: Yes, multiple PI5V330QEX devices can be cascaded together to achieve voltage translation between multiple logic levels.

Please note that these answers are general and may vary depending on the specific application and requirements.