QD Devices Inc.
L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
ADM488ANZ
Voir les détails DataSheets

ADM488ANZ

Product Overview

  • Category: Integrated Circuits (ICs)
  • Use: RS-485/RS-422 Transceiver
  • Characteristics:
    • High-Speed Data Transmission
    • Low Power Consumption
    • ESD Protection
  • Package: SOP-8
  • Essence: ADM488ANZ is a high-performance RS-485/RS-422 transceiver designed for industrial communication applications.
  • Packaging/Quantity: Available in tape and reel packaging, with 2500 units per reel.

Specifications

  • Supply Voltage: 4.75V to 5.25V
  • Data Rate: Up to 2.5 Mbps
  • Operating Temperature Range: -40°C to +85°C
  • Number of Drivers/Receivers: 1/1

Detailed Pin Configuration

The ADM488ANZ features the following pin configuration:

| Pin Number | Pin Name | Description | |------------|----------|-------------| | 1 | DE | Driver Enable | | 2 | A | Non-Inverting Driver Output | | 3 | B | Inverting Driver Output | | 4 | GND | Ground | | 5 | B | Inverting Receiver Input | | 6 | A | Non-Inverting Receiver Input | | 7 | RE | Receiver Enable | | 8 | VCC | Supply Voltage |

Functional Features

  • Full-duplex or half-duplex data transmission
  • Enhanced ESD protection for robust communication in harsh environments
  • Low power consumption for energy-efficient operation
  • Wide operating temperature range for reliable performance in extreme conditions
  • Single-driver and single-receiver configuration simplifies system design

Advantages and Disadvantages

Advantages: - High-speed data transmission up to 2.5 Mbps - Robust ESD protection ensures reliable communication - Low power consumption extends battery life in portable applications - Wide operating temperature range enables usage in various environments

Disadvantages: - Limited number of drivers and receivers (1/1 configuration) - Requires external components for complete system implementation

Working Principles

The ADM488ANZ is designed to facilitate bidirectional data transmission over long distances using the RS-485/RS-422 standard. It employs differential signaling to achieve noise immunity and high-speed operation. The driver section converts logic-level signals into balanced differential voltages, while the receiver section converts the received differential signals back into logic-level signals.

Detailed Application Field Plans

The ADM488ANZ is widely used in industrial automation, building control systems, and other applications that require reliable long-distance communication. Some specific application areas include:

  1. Factory Automation: Enables communication between PLCs, sensors, and actuators in a manufacturing environment.
  2. Building Management Systems: Facilitates data exchange between HVAC systems, lighting controls, and central management units.
  3. Access Control Systems: Provides secure communication between access control panels and card readers.
  4. Renewable Energy Systems: Allows monitoring and control of solar inverters, wind turbines, and energy storage systems.

Detailed and Complete Alternative Models

  1. MAX485ESA+: Similar RS-485/RS-422 transceiver with extended temperature range (-40°C to +125°C).
  2. SN65HVD485EDR: RS-485 transceiver with enhanced ESD protection and wide supply voltage range.
  3. LTC2857IGN#PBF: Low-power RS-485 transceiver with integrated ±60V fault protection.

These alternative models offer similar functionality and can be considered as substitutes for the ADM488ANZ in different application scenarios.

Word count: 457

Énumérez 10 questions et réponses courantes liées à l'application de ADM488ANZ dans les solutions techniques

Sure! Here are 10 common questions and answers related to the application of ADM488ANZ in technical solutions:

  1. Q: What is ADM488ANZ? A: ADM488ANZ is a popular integrated circuit (IC) used for RS-485/RS-422 communication applications.

  2. Q: What are the key features of ADM488ANZ? A: Some key features of ADM488ANZ include low power consumption, high data rates, and compatibility with RS-485 and RS-422 standards.

  3. Q: How does ADM488ANZ support RS-485 communication? A: ADM488ANZ provides differential line drivers and receivers that enable long-distance, noise-immune communication over twisted-pair cables.

  4. Q: Can ADM488ANZ be used for RS-422 communication as well? A: Yes, ADM488ANZ can be used for both RS-485 and RS-422 communication, as it supports both standards.

  5. Q: What is the maximum data rate supported by ADM488ANZ? A: ADM488ANZ supports data rates up to 250 kbps, making it suitable for various industrial and automation applications.

  6. Q: Does ADM488ANZ require external components for operation? A: Yes, ADM488ANZ requires external resistors for termination and biasing to ensure proper signal integrity.

  7. Q: Can ADM488ANZ operate in half-duplex mode? A: Yes, ADM488ANZ can operate in both half-duplex and full-duplex modes, depending on the application requirements.

  8. Q: What is the supply voltage range for ADM488ANZ? A: ADM488ANZ operates from a single +5V power supply, which makes it compatible with standard digital logic levels.

  9. Q: Is ADM488ANZ compatible with 3.3V systems? A: Yes, ADM488ANZ is compatible with 3.3V systems, but level translation may be required for proper communication.

  10. Q: What are some typical applications of ADM488ANZ? A: ADM488ANZ is commonly used in industrial automation, process control, data acquisition systems, and other applications requiring reliable long-distance communication.

Please note that these answers are general and may vary depending on the specific requirements and implementation of ADM488ANZ in a technical solution.