Voir les spécifications pour les détails du produit.
UVT-5-24 Product Overview
Introduction
The UVT-5-24 is a versatile electronic component that belongs to the category of ultraviolet (UV) transmitters. This product is widely used in various applications due to its unique characteristics and functional features.
Basic Information Overview
- Category: Ultraviolet Transmitter
- Use: Measurement and transmission of UV light intensity
- Characteristics: High sensitivity, wide spectral range, compact design
- Package: Compact housing with integrated electronics
- Essence: Accurate measurement and transmission of UV light data
- Packaging/Quantity: Individually packaged, quantity per package varies
Specifications
The UVT-5-24 has the following specifications: - Spectral Range: 200-400 nm - Sensitivity: 0.1 µW/cm² to 1 W/cm² - Output Signal: 4-20 mA - Power Supply: 24 VDC - Operating Temperature: -10°C to 60°C - Dimensions: 50mm x 30mm x 20mm
Detailed Pin Configuration
The detailed pin configuration of the UVT-5-24 is as follows: - Pin 1: Power Supply (+) - Pin 2: Power Supply (-) - Pin 3: Signal Output
Functional Features
The UVT-5-24 offers the following functional features: - High sensitivity to UV light - Wide spectral range coverage - Compact and easy-to-install design - Reliable signal output for integration with control systems
Advantages and Disadvantages
Advantages
- Accurate measurement of UV light intensity
- Compact and space-saving design
- Wide spectral range coverage
Disadvantages
- Limited operating temperature range
- Requires external power supply
Working Principles
The UVT-5-24 operates based on the principle of photoelectric effect, where incident UV light generates a current proportional to its intensity. This current is then converted into a standardized 4-20 mA signal for transmission.
Detailed Application Field Plans
The UVT-5-24 is suitable for various applications, including: - UV sterilization systems - UV curing processes - Environmental monitoring - Photolithography equipment
Detailed and Complete Alternative Models
Some alternative models to the UVT-5-24 include: - UVT-5-12: Similar specifications with a lower power supply requirement - UVT-5-36: Extended spectral range coverage up to 500 nm
In conclusion, the UVT-5-24 is a reliable and efficient ultraviolet transmitter with a wide range of applications and functional features. Its compact design and accurate measurement capabilities make it a valuable component in UV-related systems.
[Word count: 366]
Énumérez 10 questions et réponses courantes liées à l'application de UVT-5-24 dans les solutions techniques
What is UVT-5-24?
- UVT-5-24 is a type of ultraviolet (UV) lamp used for disinfection and sterilization in various technical applications.
How does UVT-5-24 work?
- UVT-5-24 emits UV-C light, which damages the DNA and RNA of microorganisms, rendering them unable to replicate and causing their death.
What are the typical technical applications of UVT-5-24?
- UVT-5-24 is commonly used in water treatment systems, air purification units, and surface disinfection equipment.
What is the lifespan of UVT-5-24 lamps?
- The average lifespan of UVT-5-24 lamps is around 9,000 hours of continuous use.
What are the key factors to consider when integrating UVT-5-24 into a technical solution?
- Factors to consider include the required UV dose for effective disinfection, proper lamp placement, and maintenance requirements.
Are there any safety precautions to be aware of when using UVT-5-24?
- Yes, it's important to avoid direct exposure to UV-C light, as it can cause skin and eye damage. Proper shielding and safety measures should be implemented.
Can UVT-5-24 be used for disinfecting sensitive materials or electronics?
- Yes, UVT-5-24 can be used for disinfection without causing damage to most sensitive materials or electronics.
What are the power requirements for UVT-5-24 lamps?
- UVT-5-24 lamps typically operate on standard electrical power sources, with wattage varying based on the specific model.
Is regular maintenance required for UVT-5-24 lamps?
- Yes, regular maintenance, including cleaning and periodic replacement of lamps, is necessary to ensure optimal performance.
Are there any environmental considerations when using UVT-5-24?
- UVT-5-24 does not produce harmful by-products and is considered an environmentally friendly disinfection method. However, proper disposal of used lamps is important due to their mercury content.