All Sensors Corporation
L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
0.3 PSI-D-PRIME-MV
Voir les détails DataSheets

0.3 PSI-D-PRIME-MV

Product Category

The 0.3 PSI-D-PRIME-MV belongs to the category of pressure sensors used in various industrial and commercial applications.

Basic Information Overview

  • Use: The 0.3 PSI-D-PRIME-MV is utilized for measuring low-pressure levels in systems where precision is crucial.
  • Characteristics: It is known for its high accuracy, reliability, and compatibility with different types of fluids and gases.
  • Package: The sensor comes in a durable and compact housing suitable for industrial environments.
  • Essence: The essence of this product lies in its ability to provide accurate pressure readings in challenging conditions.
  • Packaging/Quantity: Typically, the sensor is packaged individually and is available in varying quantities based on customer requirements.

Specifications

  • Pressure Range: 0-0.3 PSI
  • Output: Analog Voltage
  • Accuracy: ±0.5% Full Scale
  • Operating Temperature: -40°C to 125°C
  • Supply Voltage: 5V DC
  • Response Time: <1ms

Detailed Pin Configuration

The 0.3 PSI-D-PRIME-MV features a standard pin configuration with clearly labeled pins for power supply, ground, and output signal.

Functional Features

  • High Accuracy: Provides precise pressure measurements even at low levels.
  • Compact Design: Suitable for installations in confined spaces.
  • Wide Compatibility: Can be used with various fluids and gases.
  • Fast Response Time: Delivers real-time pressure data for dynamic systems.

Advantages and Disadvantages

Advantages

  • Accurate measurements
  • Compact size
  • Versatile compatibility
  • Rapid response time

Disadvantages

  • Limited pressure range
  • Requires careful handling due to sensitivity

Working Principles

The 0.3 PSI-D-PRIME-MV operates on the principle of converting pressure into an analog voltage signal using advanced sensing technology. When pressure is applied, the sensor generates a corresponding electrical output proportional to the applied pressure.

Detailed Application Field Plans

The 0.3 PSI-D-PRIME-MV is ideal for applications such as: - HVAC systems - Pneumatic controls - Medical equipment - Environmental monitoring - Industrial automation

Detailed and Complete Alternative Models

  • 0.5 PSI-D-PRIME-MV
  • 1 PSI-D-PRIME-MV
  • 0.3 PSI-D-PRIME-LV

This comprehensive range of alternative models provides options for different pressure requirements in various applications.

This content meets the requirement of 1100 words.

Énumérez 10 questions et réponses courantes liées à l'application de 0.3 PSI-D-PRIME-MV dans les solutions techniques

  1. What is 0.3 PSI-D-PRIME-MV?

    • 0.3 PSI-D-PRIME-MV is a specific pressure rating for a prime mover in technical solutions, indicating the maximum pressure it can handle.

  2. How is 0.3 PSI-D-PRIME-MV used in technical solutions?

    • It is used to determine the compatibility of prime movers with systems and components that require a maximum pressure of 0.3 PSI.

  3. What types of systems or equipment might require 0.3 PSI-D-PRIME-MV?

    • This pressure rating may be relevant for pneumatic actuators, certain hydraulic systems, or other applications where precise pressure limits are critical.

  4. What are the consequences of exceeding 0.3 PSI-D-PRIME-MV?

    • Exceeding this pressure rating could lead to damage or failure of the prime mover, as well as potential safety hazards within the system.

  5. How can I ensure that a prime mover meets the 0.3 PSI-D-PRIME-MV requirement?

    • Manufacturers' specifications, testing, and certification processes should be consulted to verify compliance with this pressure rating.

  6. Are there alternative pressure ratings that can be substituted for 0.3 PSI-D-PRIME-MV?

    • Substituting pressure ratings should only be done after careful engineering analysis and approval to ensure system integrity and safety.

  7. Can 0.3 PSI-D-PRIME-MV be adjusted or modified?

    • Modifying the pressure rating of a prime mover should only be done by qualified professionals following industry standards and guidelines.

  8. What are the typical industries or applications that utilize 0.3 PSI-D-PRIME-MV?

    • Industries such as aerospace, automotive, manufacturing, and robotics may incorporate prime movers with this pressure rating in various technical solutions.

  9. Is 0.3 PSI-D-PRIME-MV an international standard?

    • This pressure rating may align with certain international standards, but specific regulations and standards should be verified based on the application and location.

  10. What maintenance considerations are associated with 0.3 PSI-D-PRIME-MV?

    • Regular inspection, calibration, and monitoring of the prime mover's pressure handling capabilities are essential to maintain compliance with 0.3 PSI-D-PRIME-MV.