Adesto Technologies
L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
AT25DF041B-MHN-T
Voir les détails DataSheets

AT25DF041B-MHN-T

Product Overview

Category

AT25DF041B-MHN-T belongs to the category of Serial Flash Memory.

Use

It is primarily used for storing and retrieving digital information in electronic devices.

Characteristics

  • Non-volatile memory
  • High-speed data transfer
  • Low power consumption
  • Compact size
  • Wide operating voltage range

Package

The AT25DF041B-MHN-T is available in a small form factor package, making it suitable for space-constrained applications.

Essence

The essence of AT25DF041B-MHN-T lies in its ability to provide reliable and efficient storage solutions for various electronic devices.

Packaging/Quantity

This product is typically packaged in reels or trays, with a quantity of 2500 units per reel.

Specifications

  • Memory Size: 4 Megabits (512 Kilobytes)
  • Interface: Serial Peripheral Interface (SPI)
  • Operating Voltage Range: 2.7V to 3.6V
  • Operating Temperature Range: -40°C to +85°C
  • Data Retention: 20 years
  • Erase/Program Cycle Endurance: 100,000 cycles

Detailed Pin Configuration

  1. VCC - Power supply voltage
  2. HOLD - Suspends serial communication
  3. WP - Write protection control
  4. SCK - Serial clock input
  5. SI - Serial data input
  6. SO - Serial data output
  7. CS - Chip select input
  8. GND - Ground

Functional Features

  • Fast read and write operations
  • Sector erase and program capability
  • Software and hardware write protection
  • Deep power-down mode for low-power operation
  • Continuous read mode for efficient data retrieval

Advantages

  • High-speed data transfer enables quick access to stored information.
  • Low power consumption prolongs battery life in portable devices.
  • Compact size allows for integration into space-constrained designs.
  • Wide operating voltage range ensures compatibility with various systems.

Disadvantages

  • Limited storage capacity compared to higher-density flash memory options.
  • Relatively lower data transfer rates compared to some other memory technologies.

Working Principles

AT25DF041B-MHN-T utilizes the Serial Peripheral Interface (SPI) protocol to communicate with the host device. It stores data in non-volatile memory cells, which retain information even when power is disconnected. The SPI interface enables fast and efficient read and write operations, making it suitable for applications that require frequent data access.

Detailed Application Field Plans

The AT25DF041B-MHN-T is widely used in various electronic devices, including but not limited to:

  1. Consumer electronics: Smartphones, tablets, digital cameras
  2. Automotive: Infotainment systems, instrument clusters
  3. Industrial: Measurement equipment, control systems
  4. Communication: Routers, modems
  5. Medical: Patient monitoring devices, diagnostic equipment

Detailed and Complete Alternative Models

  1. AT25DF321A-MHN-T: 32 Megabit Serial Flash Memory
  2. AT25SF081A-MHN-T: 8 Megabit Serial Flash Memory
  3. AT25SL321-MHN-T: 32 Megabit Ultra-Low Power Serial Flash Memory
  4. AT25DL161-MHN-T: 16 Megabit Dual Output Serial Flash Memory

These alternative models offer different storage capacities and features to cater to diverse application requirements.

Word count: 498 words

Énumérez 10 questions et réponses courantes liées à l'application de AT25DF041B-MHN-T dans les solutions techniques

Sure! Here are 10 common questions and answers related to the application of AT25DF041B-MHN-T in technical solutions:

  1. Q: What is the AT25DF041B-MHN-T? A: The AT25DF041B-MHN-T is a serial flash memory chip manufactured by Adesto Technologies. It has a capacity of 4 megabits (512 kilobytes) and operates on a SPI interface.

  2. Q: What are some typical applications for the AT25DF041B-MHN-T? A: This flash memory chip is commonly used in various embedded systems, IoT devices, consumer electronics, automotive applications, and industrial control systems.

  3. Q: What voltage does the AT25DF041B-MHN-T operate at? A: The AT25DF041B-MHN-T operates at a voltage range of 2.7V to 3.6V.

  4. Q: What is the maximum data transfer rate supported by this flash memory chip? A: The AT25DF041B-MHN-T supports a maximum clock frequency of 104 MHz, allowing for fast data transfer rates.

  5. Q: Can I write data to individual bytes or sectors of the AT25DF041B-MHN-T? A: Yes, the chip supports both byte-level and sector-level write operations, providing flexibility in storing and updating data.

  6. Q: Is the AT25DF041B-MHN-T capable of executing code directly from the flash memory? A: Yes, it has an execute-in-place (XIP) capability, allowing code to be executed directly from the flash memory without the need for copying it to RAM.

  7. Q: Does the AT25DF041B-MHN-T support hardware and software protection features? A: Yes, it offers hardware protection through write protection pins and software protection through various security features like password protection and lock bits.

  8. Q: Can I perform in-system programming (ISP) on the AT25DF041B-MHN-T? A: Yes, the chip supports in-system programming, allowing firmware updates to be performed without removing it from the system.

  9. Q: What is the typical endurance of the AT25DF041B-MHN-T? A: The flash memory has a typical endurance of 100,000 program/erase cycles, ensuring reliable and long-lasting data storage.

  10. Q: Are there any development tools or software libraries available for working with the AT25DF041B-MHN-T? A: Yes, Adesto Technologies provides development tools, software libraries, and documentation to assist developers in integrating and programming the flash memory chip in their applications.

Please note that these answers are general and may vary depending on specific implementation details and requirements.